Accessories for LLG-uniPERISTALTICPUMP 1 and 3 | Description: Pumphead with PharMed® tubing ID 1 mm
Product number:
6263542
Manufacturer:
LLG Labware
Length:
58 mm
Width:
38 mm
Height:
25 mm
Weight:
0.01 kg
* Specifications refer to the packaging unit
ID = Inner diameter
OD = Outer diameter
| Description: | Pumphead with PharMed® tubing ID 1 mm |
|---|---|
| For: | LLG-uniPERISTALTICPUMP 1 |
Similar products
With 2 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380 mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
The extra compact peristaltic pump. Ideal for continuous dosing applications. Space-saving, robust and with a wide range of easily exchangeable pump heads.Stable flow ratesCompact designReversible working directionPump heads easily exchangeableVarious pump heads with different hose diameters available as accessoryLow power consumptionCorrosion-resistant ABS housingOLED display for indication of speed and working directionWorking temperature range from 0 to 40 °CMax. humidity 80 %Scope of supply: Pump, pump head, Pharmed® hose connectors 3 mm ID, 5 mm AD
These new magnetic drive pumps are designed for pumping acids, bases, mixtures of acids and bases, solvents, photochemicals into alkali stripping baths, galvanic baths, as well as radioactive, sterile, expensive or highly corrosive liquids. The pumps are sealless. The impeller is driven by the magnetic force of the outer magnets, therefore no mechanical seal is required. As the pump housing is hermetically sealed no leaks can occur. The use of high performance,permanent magnets, ensures high transmission forces even at elevated temperatures.viscosity up to 20 mPaspump complete with flanged-to motorMagnetic drive pump 15 Watt: Motor 230V, material PP (fibre-glass reinforced), stainless steel (shaft), Viton® (O-ring), tubing connection 14mmMagnetic drive pump 29 Watt: Motor 230V, material PP (fibre-glass reinforced), ceramics (shaft), Rulon (guide bearing), Viton® (O-ring), suction/discharge G ¾" OT (BSP)
Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
The peristaltic pump with high pumping capacity. Ideal for continuous dosing applications. Space-saving, robust and with stable flow rate.High pumping capacity of 398 ml/minReversible working directionHose connectors easily exchangeableLow power consumptionCorrosion-resistant ABS housingOLED display for indication of speed and working directionWorking temperature range from 0 to 40 °CMax. humidity 80 %Scope of supply: Pump, pump head, Pharmed® hose connectors 6,4 mm ID, 9,6 mm AD
Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.Feed direction reversibleFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingPump heads with convex rollers for cell protection are available for use in cell biologyThe flow rate depends on the used pump head. The pump head is not included. Please order separately.This pump drive is only suitable for use with single-channel pump heads.
Fast and convenient tube changesLow pulsation due to 5 roller systemPump head features ball bearingsRollers made of stainless steelFor tubes with a 1.6mm or 2.5mm wall thickness (wt)Depending on drive and tubing, the flow rate ranges from 0.38 to 3436 ml per minute
Independent 4-Channel Control PumpIncreased efficiencyControl of complex pump applications with only one pumpControlled by computer or directly through the control panel on the pumpContinuous pumping and precise dosingFlexible bi-directional flow direction in each channelSelf-primingEspecially for viscous or foaming liquids, also when containing particles or live cellsContamination-free pumping even under sterile conditions