Accessories for Screw pump VACUU·PURE® 10 | Type: Mobile underframe VACUU·PURE shuttle
CHF 1,101.60*
Content:
1
Delivery according to order confirmation
Product number:
6316419
Manufacturer:
Vacuubrand GmbH & Co.KG
Weight:
5.354 kg
* Specifications refer to the packaging unit
| Type: | Mobile underframe VACUU·PURE shuttle |
|---|
Similar products
The portable piston pump LLG-uniVACUUPUMP 1 has been developed for vacuum and pressure applications in the laboratory, in particular in the field of Life Science. Typical applications for this low-cost vacuum pump are the single funnel filtration of aqueous and buffered solutions, SPE, as well as any applications where no harmful gases are conveyed. The LLG-uniVACUUPUMP 1 operates oil-free and can also be used as a compressor to a pressure up to 3.3 bar. This allows you, for example, pressure filtration, if vacuum filtration is not sufficient.Not recommended for pumping organic, acidic, or basic vapours.Advantages:Dry-running technology for physical applicationsCan be used as a vacuum pump and compressorCost-effective alternative for water pumpsSound suppressor for quiet operationCompact, light weight and portableOil-free, suitable for continuous operationSuction/pressure connection: hose nozzle DN 6 for hose inner diameter 6 mmScope of supply: Pump, incl. 2 hose clamps, EU + UK-plug power cordSpecificationsPump speed 50/60 Hz at atmospheric pressure:9.2/11 l/minFinal pressure:292 mbarMax. overpressure:3.3 barMax. operating gas temperature:60 °CPermissible ambient temperature:10 ... 40 °CSuction/pressure connection:DN 6Noise emission:45 dB(A)Motor power:25 WDimensions (W x D x H):194 x 114 x 191 mmWeight:2.0 kgPower supply:230 V/50 HzIP code:IP 20Warranty:3 years
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.The chemical-resistant version VACUU·PURE® 10C is protected against corrosion due to chemically resistant polymers on all wetted parts. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance. An integrated sealing gas supply prevents the bearings from chemical attack. Due to the design-related high condensate compatibility, no gas ballast is required, even with high vapor loads.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfaceSpecificationsFinal pressure:5 x 10-3 mbarMax. overpressure:15 mbarPermissible ambient temperature:10 ... 40 °CSuction/pressure connection:KF DN 25Noise emission:55 dBAMotor power:700 WDimensions (W x D x H):269 x 507 x 413 mmWeight:21.1 kgPower supply:230 V, 50/60 HzIP code:IP 20
Piston pumps are a reliable partner for physical applications, notably with aqueous solutions. Being a vacuum pump and compressor, it can be used for a wide variety of applications such as filtration, gas sampling, vacuum drying, desiccation and automation technology. The integrated vacuum and pressure gauges and regulators allow the pressure to be continuously monitored and adjusted. For use with dry or aqueous vapor applications only.Oil freeEasy to cleanEasy maintenanceEasy handling and control featuresRobust constructionPressure connection with exhaust silencerSuction/pressure connection: hose nozzle DN 8 for hose inner diameter 8 mmScope of delivery: vacuum pump, vacuum and pressure regulators with gauges, inlet water trap and mufflerSpecificationsSuction/pressure connection:DN 8Ambient temperature:10 ... 40 °CMax. Operating gas temperature:60 °CNoise DIN EN ISO 2151:56 dB (A)IP code:IP 20