Accessories for TITRONIC® / TitroLine®

Description:	Magnetic stirrer
For:	TITRONIC® 300/TitroLine® 5000
Manufacturer Article Number:	285225840
Type:	TM 50

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Description	For	Manufacturer Article Number	Type

Accessories

Xylem Analytics Germany (SI)

Volumetric KF-titrator TitroLine® 7500 KF, with interchangeable module WA 10

You cannot go wrong with the TitroLine® KF titrators from SI-Analytics. The TitroLine® 7500 KF is the volumetric generalist for a wide range of use.Fast, easy and preciseWith standard methods for different applications (titer determination, blank value...)High visible full colour display, that can be easily viewed from a distance and extreme anglesStorage of results via USB and LAN port (PDF and CSV -format)With online curveWith intelligent interchangeable modulesApplications TitroLine® 7500 KF: KF volumetry, dead-stop-titrations (SO2, bromine number)Scope of supply: Titrator unit, interchangeable module WA 10, TM 235 KF titration stand with integrated stirrer and pump, titration vessel TZ 1770, micro-dual platinum electrode KF 1100 and starter kit, power supply 100-240 V

From CHF 9,686.00*

Similar products

Automatic Titrator TitroLine® 5000, with 50 ml dosing unit

Very compact titrator for simple routine titrations. Thanks to the standard methods the creating of methods is no longer required. Just load the method and press the start button. GLP compliant results with titration curve can be documented on a connected printer or USB-memory stick.Colour TFT display, excellent readability even from the sideStorage of results as PDF and CSV on USB stickPre-installed standard methodsMeasuring input electrode: pH/mV-input with DIN or BNC socketMeasuring input Pt 1000/NTC 30: Temperature sensor connection for resistance probes Pt 1000 or NTC 30 (socket: 2 x 4 mm)Interfaces: 1 x USB A und 1 x USB-B, 2 x RS-232-CDosing units: 20 ml or 50 ml dosing unit, interchangeableConformity: ISO 8655, part 6Following titration modes are possible:Titrations to pH, mV and µA endpoint (2 EP)Titrations to one equivalence point (pH und mV) with dynamic or linear titration additionManual titrations with the controllerDosing tasksNumber of methods: 5Typical applications for the TitroLine® 5000 are:Salt content in foodstuffs (cheese, soy sauce, ketchup)Total acidity in wine and beveragesNitrogen according to KjeldahlChloride in drinking water and other samplesAlkalinity (p + m-value)FOS/TACScope of supply: Basic unit without magnetic stirrer, with ready to use assembled 50 ml dosing unit TZ 3160 with hoses, fittings and titration tip, power supply 100-240 V

From CHF 5,370.30*

Coulometric KF-titrator TitroLine® 7500 KF trace module 6 TitriSoft Pharma

You cannot go wrong with the TitroLine® KF titrators from SI-Analytics. The TitroLine® 7500 KF trace is the specialist for low water contents.Fast, easy and preciseWith standard methods for different applications (titer determination, blank value...)High visible full colour display, that can be easily viewed from a distance and extreme anglesStorage of results via USB and LAN port (PDF and CSV -format)With online curveApplications TitroLine® 7500 KF trace: KF coulometry, bromine numberScope of supply: titrator unit, generator electrode TZ 1752 without diaphragm, titration stand TM 235 TO, titration vessel TZ 1754, micro-dual platinum electrode KF 1150, connection cable TZ 3094, software TitriSoft 3.5 P

From CHF 19,113.52*

Titration vessels and accessories for automatic titrators

For Mettler-Toledo titrators.

From CHF 195.00*

Thread adapters for Varispenser® 2/2x and Top Buret

From CHF 10.50*

Automatic Titrators Orion Star™ T910

Automatic titrators for redox and ion titrations.Create up to ten user-defined methodsSaves up to 100 titration data sets with date/time stampEasy data transfer to printer, computer or USB driveProgramming of automated titration sequencesTitrations can be performed unattendedShowcase titrations, onscreen instructions and help menus on a large color graphic touchscreen displayEasy to replace titrator partsLong lasting electrodesDisplay results in real time, in summary table and in data log (up to 100 entries)Tested and validated pre-defined methods can be loaded onto the titratorTitration of acidity of juices and wines, acidity of food, alkalinity of water, acidity and alkalinity of consumer goods, total acid number (TAN) and total base number (TBN)Scope of supply:START9100: Titrator incl. 20 ml burette, stirrer probe, dispenser probe, standard tubing kit, 1 l plastic bottle, GL38 bottle cap with drying tube, computer cable, manual on USB drive, 110-240 V power supplySTART9101: As START9100, additionally with ROSS Ultra pH electrode and probe for temperature compensation (ATC)START9102: As START9100, additionally with ROSS Sure-Flow pH electrode and probe for temperature compensation (ATC)SpecificationsTitration precision:±0.5 % RSDSpeed of stirrer probe:250 ... 3700 rpm, 5 selectable speedspH range: Resolution: Rel. accuracy:0 ... 14 0.001 / 0.01 / 0.1 (selectable) ±0.002 pHpH calibration mode:1 to 5 pointsmV range: Resolution: Rel. accuracy:-2000.0 ... +2000.0 mV 0.1 mV ±0.2 mVTemperature range: Resolution: Rel. accuracy:-5,0 ... 100.0 °C 0.1 °C ±0.2 °CDisplay:5.7'' Touchscreen, 640 x 480 resolutionBurette sizes:10 ml, 20 ml, 50 mlBurette resolution:25,600 micro-steps per motor revolution 2 million micro-steps over full stroke rangeDosing accuracy:Acc. to ISO 8655-3Dimensions (W x D x H):406 x 254 x 356 mmWeight:5.67 kgPower supply:100 ... 240 V, 50/60 HzCertification:TÜV 3-in-1, FCC, EN/EIC 61326-1, IEC 61010, IP-51

From CHF 5,496.77*

Accessories for Automatic Titrators Orion Star™

From CHF 36.77*

Titrator TitroLine® 7800, with magnetic stirrer TM 235 and software TitriSoft 3.5

The TitroLine® 7800 is the new all-rounder for potentiometric titration with an additional digital measuring input. That enable for example the connection and use of pH and conductivity sensors at the same time. An additional external conductometer is not required anymore. The TitroLine® 7800 can also be used as volumetric KF titrator.High visible full color display, that can be easily viewed from a distance and extreme anglesWith intelligent interchangeable modules and storage of all relevant reagent dataIncludes two USB-A, one USB-B, two RS-232 and one LAN port for expansion and connection of devices such as keyboard, printer, barcode reader, memory sticks, balances, PC an further SI Analytics devicesStorage of results via USB and LAN port (PDF and CSV-format) including method transferWith one analogue and one digital measuring input. The digital input allows the connection of digital (IDS) pH and conductivity sensorsWith standard methods for potentiometric and KF titrationScope of supply: Basic unit with magnetic stirrer TM 235, with stand rod TZ 1510, titration clamp Z 305, keyboard TZ 3835 and power supply 100-240 V, software TitriSoft 3.5

From CHF 16,403.00*

Titrator TitroLine® 7750, with magnetic stirrer TM 235

TitroLine® 7750 is the all-rounder for both potentiometric titration and volumetric KF titration. The TitroLine® 7750 combines the features of the potentiometric titrator TitroLine® 7000 and the volumetric Karl Fischer titrator TitroLine® 7500.Highly visible full color display, that can be easily viewed from a distance and extreme anglesWith new interchangeable modules (5, 10, 20, 50 ml) which all relevant reagent and unit data can be storedThanks to the 2 x USB-host, 1 x USB-PC and 2 x RS232 ports, very communicable. Connect for example, USB keyboard, USB printer, barcode reader, USB flash drives, balances, PC und further SI Analytics devices such as piston burettes and sample changersStorage of results via USB and LAN port (PDF and CSV -format) including method transferWith standard methods for potentiometric and KF titrationMeasuring input pH/mV: pH/mV-input with DIN or BNC socket, TitroLine® 7750 additionally with ID function for automatic detection of electrodeMeasuring input Dead Stop: µA-input for double platinum electrode (socket 2 x 4 mm), pole voltage adjustableTemperature: for resistance probes Pt 1000/NTC 30 kOhm (socket: 2 x 4 mm)Scope of supply: Basic unit with magnetic stirrer TM 235, with stand rod TZ 1510, titration clamp Z 305, keyboard TZ 3835 and power supply 100-240 V

From CHF 8,095.00*

pH sensor EasyPlus™ for titrator EasyPlus™

Titration sensor made of glass for reliable results in routine applications for acid/base titration. With fixed BNC cable. For aqueous media.

From CHF 377.00*

Automatic Titrator TitroLine® 5000, with 20 ml dosing unit

Very compact titrator for simple routine titrations. Thanks to the standard methods the creating of methods is no longer required. Just load the method and press the start button. GLP compliant results with titration curve can be documented on a connected printer or USB-memory stick.Colour TFT display, excellent readability even from the sideStorage of results as PDF and CSV on USB stickPre-installed standard methodsMeasuring input electrode: pH/mV-input with DIN or BNC socketMeasuring input Pt 1000/NTC 30: Temperature sensor connection for resistance probes Pt 1000 or NTC 30 (socket: 2 x 4 mm)Interfaces: 1 x USB A und 1 x USB-B, 2 x RS-232-CDosing units: 20 ml or 50 ml dosing unit, interchangeableConformity: ISO 8655, part 6Following titration modes are possible:Titrations to pH, mV and µA endpoint (2 EP)Titrations to one equivalence point (pH und mV) with dynamic or linear titration additionManual titrations with the controllerDosing tasksNumber of methods: 5Typical applications for the TitroLine® 5000 are:Salt content in foodstuffs (cheese, soy sauce, ketchup)Total acidity in wine and beveragesNitrogen according to KjeldahlChloride in drinking water and other samplesAlkalinity (p + m-value)FOS/TACScope of supply: Basic unit without magnetic stirrer, with ready to use assembled 20 ml dosing unit TZ 3130 with hoses, fittings and titration tip, power supply 100-240 V

From CHF 5,413.00*