Ashing/Burn off furnaces LV 3/11 - LVT 15/11

The models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.

Tmax 1100°C
Heating from two sides
Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace
Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
Housing made of sheets of textured stainless steel
Dual shell housing for low external temperatures and stability
Optional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operator
Solid state relays provide for low noise operation
Air exchange of more than 6 times per minute
Good temperature uniformity due to preheating of incoming air
220-240 V 1/N/PE 50/60 Hz connector as standard

Option:

Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
Observation hole in the oven door
Process control and documentation via VCD software package for monitoring, documentation and control

Height incl. exhaust tube (diam. 80 mm)
External dimensions vary for versions with additional equipment. Dimensions on request.

Depth int.:	140 mm
Ext. depth:	360 mm
Ext. height:	735 mm
Ext. width:	385 mm
External dimensions (WxDxH):	385 x 360 x 735 mm
Height int.:	100 mm
Int. width:	160 mm
Internal dimensions (WxDxH):	160 x 140 x 100 mm
Manufacturer Article Number:	LV035K11NL
Max. temperature:	1100 °C
Max. voltage:	240 V
Nominal capacity:	3 l
Power supply:	240 V, 50/60 Hz
Power supply frequency:	50/60 Hz
Rated capacity:	1.2 kW
Type:	LV 3/11/B510
Type of auxiliary energy:	Mains connection
UNSPSC:	40101805

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Depth int.	Ext. depth	Ext. height	Ext. width	External dimensions (WxDxH)	Height int.	Int. width	Internal dimensions (WxDxH)	Manufacturer Article Number	Nominal capacity	Rated capacity	Type	UNSPSC

Accessories

Nabertherm GmbH

Charging rack for ashing furnaces

Charging rack to load the furnace in different levels, including holders to insert and remove the trays.

From CHF 1,281.00*

Similar products

Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalCeramic bottom plateControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)

From CHF 2,943.00*

Muffle Furnaces Series LE 1/11 - LE 24/11 up to 1100 °C

Compact muffle furnaces with dual shell furnace housing of rust-free stainless steel and heating elements encased in quartz glass tubes.Tmax 1100 °C, working temperature 1050 °CHeating from two sides from heating elements in quartz glass tubesMaintenance-friendly replacement of heating elements and insulationInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and high stabilityFlap door which can also be used as a work platformExhaust air outlet in rear wallCompact dimensions and light weightController mounted under the door to save spaceEquipped with the basic controller R 7 with one free storeable temperature, which is dwelled until the controller is switch offStandard power supply 230 V, 1/N/PE, 50/60 HzExternal dimensions vary for versions with additional equipment. Dimensions on request.

From CHF 1,891.00*

Collecting Pans for Muffle and Ashing Furnaces

Ceramic collecting pans for temperatures up to max. 1300 °C, steel collecting pans for temperatures up to max. 1100 °C.

From CHF 126.00*

Tube Furnaces

These compact tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have an unbeatable price/performance ratio.Tmax 1200 °C or 1300 °CSingle-zoned design as standardDual shell housing made of sheets of textured stainless steelOuter tube diameter of 50 to 170 mm, heated length from 250 to 1000 mmWorking tube of C 530 ceramic including two fiber plugs as standard equipmentSolid state relays provide for lownoise operationAvailable with the programmable controllers B 510, C 550 and P 580 (for three-zoned design) with adjustable ramps and hold timesStandard power supply 400 V 3/N/PE 50/60 Hz (R 50/250 und R 50/500: 220 V, 1/N/PE, 50/60 Hz)Option:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadCharge control with temperature measurement in the working tube and in the furnace chamber outside the tubeThree-zoned design (heated length from 500 mm)Working tubesGas supply systems for protective gas or vacuum operationProcess control and documentation with VCD software package

From CHF 4,949.00*

Muffle furnaces Thermolyne™

The muffle furnaces are suitable for ashing, annealing processes, digestion, heat treatment of metals and drying processes at high temperatures.Built-in ventilation portDoor safety switch: when the door is opened, the power supply to the heating elements is interruptedPort in the rear of the chamber for external temperature monitoring

From CHF 1,803.00*

Tube Furnaces with Stand

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems.Vertical or horizontal operation freely adjustableWorking height freely adjustableWorking tube made of C 530 ceramicControl system integrated in furnace baseNTLog Basic for Nabertherm controller: recording of process data with USB-flash driveEquipped with the programmable controller B 510 (with touch panel, 5 programmes with 4 segments each), optionally available with the C 550 controller (with touch panel, 10 programmes with 20 segments each)

From CHF 9,100.00*

Charging rack for ashing furnaces

Charging rack to load the furnace in different levels, including holders to insert and remove the trays.

From CHF 1,281.00*

Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller

From CHF 1,601.00*

Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller

From CHF 1,781.00*

Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller

From CHF 2,517.00*