Beakers, glass, jacketed wiht PTFE-Olive, type T-GL
CHF 170.00*
Content:
1
Delivery according to order confirmation
Product number:
9032372
Manufacturer:
KGW Schieder GmbH
Packaging information:
Weight:
0.227 kg
Description
DURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass-screw connections GL14 with PTFE olives (O.D. 9mm, T-GL2000 with GL18 and O.D. 11mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +120°C at maximum. Special sizes available on request.
Properties
| Connection: | PTFE olive |
|---|---|
| Dimensions external (Ø x H): | 70 x 120 mm |
| Dimensions internal (Ø x H): | 55 x 115 mm |
| Ext. height: | 120 mm |
| Ext. Ø: | 70 mm |
| Height int.: | 115 mm |
| Int. Ø: | 55 mm |
| Manufacturer Article Number: | 1355 |
| Material: | Boro 3.3 |
| Max. coolant pressure: | 0.5 bar |
| Max. temperature resistance: | 120 °C |
| Nominal capacity: | 250 ml |
| Olives ext. Ø: | 9 mm |
| Temperature resistance: | 120 °C |
| Thread: | GL 14 |
Skip product gallery
Beakers, glass, jacketed, type T
From
CHF 153.00*
Temperature hoses, stainless steel 1.4404, triple insulation
From
CHF 406.00*
Thermal fluids SilOil
From
CHF 675.00*
Tempering liquids for dynamic temperature control systems PRESTO
From
CHF 160.00*
Tempering liquids
From
CHF 154.00*
Bath fluid Polyclear Mix 30 Plus
From
CHF 195.00*
Function upgrade for Huber circulators
From
CHF 1,053.00*
Heat transfer liquid Kryo 60
From
CHF 1,045.00*
Heat transfer liquid Kryo 65
From
CHF 435.00*
Similar products
DURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass olives (O.D. 12mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +300°C at maximum. Special sizes available on request.
Temperature hoses with special triple insulation and two M16 x 1 connections. The ends are covered with silicone caps for protection. Max. pressure 6 bar (at 20 °C), 4 bar (at 350 °C).
Huber thermal fluids are recommended because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results.Temperature ranges refer to use in closed systems.
Long-term tested for safe and reliable operation. Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
Long-term tested for safe and reliable operation.Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
Prevents premature rusting and the growth of algae. Ideal for use in circulators, water baths, shaking water baths or heating baths. For routine applications from 5 to 90 °C.
E-grade - innovative activation keys for the functionality to suit your budget and process requirementsEvery application requires particular functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative "E-grade" has the answer. Models with the Pilot ONE Controller have a comprehensive range of functions suited to the classical temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade stands for electronic upgrade and it is simple to do: To extend the functionality a unit specific code is entered via the controller. This code is specific to the serial number of the unit and is either already entered at the factory for new units or it can be activated at a later date. The code is sent by email. There is no requirement for a hardware or software update.The E-grade "Explore" for Unistats is more than just another functions package. It makes important information available to users of Unistat temperature control systems. Temperature values and temperature differentials as well as for the actual heating power, cooling power and pump power within the system are displayed on the touch-panel. E-grade "Explore" is an evolution of the existing Unistat technology. Existing sensors are utilised to make important process temperature and power data visible. In addition to making the data visible on the display of the device, it can also be accessed via the digital interfaces for further processing. Application examples for E-grade® "Explore": Process and product development and optimisation Use-Tests of raw materials, quality control Enhanced data collection for scale-up trials
Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.Chemically inert and environmentally friendly synthetic silicone oilLow viscosity, for temperatures below 0 °CConforms with REACH and RoHsNot suitable for use with silicone tubing.
Heat transfer liquid based on mineral oil. Ideal for applications in closed temperature control circuits and surface-sensitive applications.Low viscosity, for temperatures below 0 °CSilicone-free mediumNon-corrosiveConforms with REACH and RoHsNot suitable for use with EPDM tubing.