Centrifuge bottles Nalgene™, PP-copolymer
CHF 26.60*
Content:
1
| Quantity | Unit price |
|---|---|
| To 3 |
CHF 26.60*
|
| From 4 |
CHF 19.40*
|
Delivery according to order confirmation
Product number:
9315720
Manufacturer:
Thermo Elect.LED GmbH (Nalge)
Packaging information:
Weight:
0.06 kg
Description
PP-copolymer with PP screw cap. Autoclavable.
Properties
| Autoclavable: | Yes |
|---|---|
| Dimensions (ØxH): | 73.8 x 169.8 mm |
| Height: | 169.8 mm |
| Manufacturer Article Number: | 3120-0500 |
| Material: | PP |
| Max. rcf: | 4800 x·g |
| Nominal capacity: | 500 ml |
| Type of closure: | Screw cap |
| Ø: | 73.8 mm |
Skip product gallery
From
CHF 40.60*
From
CHF 40.40*
Accessories
Thermo Elect.LED GmbH (Nalge)
Thermo Elect.LED GmbH (Nalge)
Sealing cap assemblies Nalgene™, PP
PP screw cap with Tefzel® ETFE plug liner and viton O-ring. Leak-proof at recommended maximum speed and rcf for tubes. Suitable for working with aggressive chemicals. The 38mm assembly has a PP shoulder reinforcement ring to prevent collapsing of the 250ml bottles.Tefzel® is registered trademark of DuPont.
Thermo Elect.LED GmbH (Nalge)
Thermo Elect.LED GmbH (Nalge)
Sealing cap assemblies with silicone seal Nalgene™, PP
For Oak Ridge centrifuge test tubes made of PP, PC and polysulphone.
Skip product gallery
From
CHF 32.60*
From
CHF 24.10*
From
CHF 0.30*
From
CHF 6.30*
Other customers also bought
Thermo Elect.LED GmbH (Nalge)
Thermo Elect.LED GmbH (Nalge)
Wide-mouth centrifuge bottles Nalgene™, PP-copolymer
PP-copolymer with sealing screw cap. Autoclavable.
Thermo Elect.LED GmbH (Nalge)
Thermo Elect.LED GmbH (Nalge)
Centrifuge bottles Nalgene™, PC
PC with PP screw cap. Crystal clear. Good mechanical strength. Autoclavable. Leak-proof even at low speeds. In order to ensure that the system is leak-proof even at high speeds and when centrifuging dangerous substances, the 250ml and 1000ml sizes must be used in conjunction with sealing screw cap sets.
Glaswarenfabrik Karl Hecht
Glaswarenfabrik Karl Hecht
Centrifuge tubes, round bottom, AR glass®, ungraduated
Maximum loading: 3500 x g rcf. Smooth rim, wall thickness: 2.0 mm.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Centrifuge tubes, round bottom, DURAN®
To DIN 58970 part 2. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.Maximum loading: 4000xg rcf.* Not to DIN.
Skip product gallery
LLG-Centrifuge tubes economy, PP
From
CHF 122.00*
Centrifuge tubes, round bottom, AR glass®, ungraduated
From
CHF 0.30*
Centrifuge tubes Nalgene™ Oak Ridge, PPCO, with sealing caps, PP
From
CHF 15.40*
Centrifuge tubes, round bottom, DURAN®
From
CHF 6.30*
Eppendorf Tubes® 5.0 mL, PP, with hinged lid
From
CHF 50.80*
LLG-Microcentrifuge tubes, PP, with Safe-Lock lid
From
CHF 24.00*
Test and Centrifuge Tubes Falcon®, PS and PP, with graduation
From
CHF 169.40*
Nalgene™ Oak-Ridge centrifuge tubes, PP-copolymer
From
CHF 9.90*
Centrifuge tubes, PP
From
CHF 11.10*
Similar products
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
Maximum loading: 3500 x g rcf. Smooth rim, wall thickness: 2.0 mm.
Transparent. For use up to 50,000 x g in cooled and uncooled centrifuges (Cat. no. 9.315685 can be used up to 100,605 x g). PP sealing caps with silicone seal for additional leak protection when centrifugation at >10,000 x g or when centrifugation of hazardous substances.Round bottomGood mechanical strengthHigher chemical resistance than polycarbonateMultiple autoclavableLeak-proof
To DIN 58970 part 2. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.Maximum loading: 4000xg rcf.* Not to DIN.
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °CFrom 80 °C on, please use tube clips (cat. no. 9.409 294)
Tip
LLG-Microcentrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-freeTemperature range -86 up to 121 °C
Widely used and referenced in laboratory protocols.Round bottomDual position snap-cap, PE for easy handling as indicatedSterile, pyrogen-free (<0.1 EU/ ml)
PP-copolymer with PP screw cap. PPCO is more resistant to chemicals than PC. Autoclavable. When wet, the translucent test-tube enables observation of the contents. Can be used in refrigerated and unrefrigerated centrifuges at up to 50,000 x g rcf. Accessory sealing cap assemblies are available for all sizes.
Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Tubes are sterile, cytotoxicity-free, DNase/RNase- and human DNA-free.