Chemistry Pump Units and Vacuum Systems | Type: PC 610 select
CHF 13,311.00*
Content:
1
Delivery according to order confirmation
Product number:
4670516
Manufacturer:
Vacuubrand GmbH & Co.KG
* Specifications refer to the packaging unit
Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.
Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports
Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.
With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.
Country-specific power cord versions available on request.
- 100% oil-free pumping of gases
- gas ballast as standard for working with condensable vapours
- good vacuum even with gas ballast
- high vapour tolerance for water and solvents
- long service life, low maintenance
Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports
Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.
With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.
Country-specific power cord versions available on request.
| Connector: | CEE |
|---|---|
| Dimensions (W x D x H) mm: | 243 x 419 x 457 |
| Type: | PC 610 select |
| Ultimate vacuum without / with gas ballast mbar (abs.): | 1.5 / 3 |
| max. discharge flow m³ / hr.: | 3.4 / 3.8 |
Other customers also bought
Vacuubrand GmbH & Co.KG
Chemistry Pumping Units VARIO® select
The combination of speed controlled VARIO® chemistry diaphragm pumps and the new VACUU·SELECT vacuum controller makes the VARIO® select chemistry pumps the ideal solution for chemical processes that require precise vacuum, such as rotary evaporation, vacuum drying or vacuum concentration.High chemical resistance and therefore ideally suited for pumping aggressive gases and vapours.Short process times and smooth running due to optimal setting of the pressure via the VACUU·SELECT controller.The VARIO® technology controls the vacuum precisely and efficiently via motor speed.Power consumption, maintenance and noise are exceptionally low.The outlet catchpot and solvent condenser combine to prevent solvent vapor emissions into the lab, allowing for nearly full recovery of solvents.Country-specific power cord versions available on request.
Vacuubrand GmbH & Co.KG
Chemistry Pumping Unit PC 3001 VARIO® select with condenser Peltronic®
The PC 3001 VARIO® select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. This pump is suitable for even high boiling point solvents. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The pump's variable motor speed responds to demand, reducing energy waste and mechanical wear, ensuring unrivalled service life for the diaphragms.For solvent evaporation, the controller detects solvent boiling and automatically adjusts the pump's motor speed to maintain process controlUser-defined applications with simple drag-and-drop editing.Small footprint and low weight for flexible use in the laboratoryThe inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pumpThe included emission condenser Peltronic® works without any cooling media like water or dry ice.Scope of supply: Chemistry pumping unit PC 3001 VARIO® select completely mounted with conderser Peltronic®, ready for use, with manual.Without mains cable, please order separately.SpecificationsCooling power at 21 °C:50 WAmbient temperature range:10 ... 40 °CPreset cooling temperature:10 °CMaterials in contact with media:PP, PFA, ETFE/ECTFE, borosilicate glassPower supply:100 ... 230 V, 50/60 HzDimensions (W x D x H):175 x 179 x 392 mm
Vacuubrand GmbH & Co.KG
Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C
The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.Diaphragm pumps ATEX-models available on request. Country-specific power cord versions available on request.
Similar products
Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.100% oil-free pumping of gasesgas ballast as standard for working with condensable vapoursgood vacuum even with gas ballasthigh vapour tolerance for water and solventslong service life, low maintenanceFeatures:2AK: Inlet and outlet separatorAK + EK: Inlet separator, exhaust vapour condenserPC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum portPC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum portPC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum portsCharacteristics and applications: Without vacuum control: MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outletMZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN®. For high-boiling solvents.MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.With vacuum controller: PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.Country-specific power cord versions available on request.
Suitable for all Hei-VAP Rotary evaporators. Vacuum can be controlled manually or via valve operated vacuum controllers.With two-stage diaphragm pumpAll components which come in contact with media are built from chemically resistant fluoropolymerThe durable PTFE design guarantees an superior diaphragm lifespanThe head cover and clamping disc have a stable core made of metal which offers unsurpassed long-term performance of your operational parametersThe direct pump drive (without belt) is exceptionally quiet, creates a very low vibrational environment and reduces the need of wear and tear parts to a minimumThe gas ballast valve has been optimized to prevent media condensing in the pumpThe pumps can be combined with a condenserFor combination with the Hei-VAP Precision Rotary evaporators a vacuum valve is necessary.Recommended for solvents with low or medium boiling points.SpecificationsSuction capacity:0.75 m³/hUltimate vacuum:12 mbarPower input:80 WDimensions (W x D x H):145 x 315 x 169 mmWeight:6 kg
Suitable for all Hei-VAP Rotary evaporators. Vacuum can be controlled manually or via valve operated vacuum controllers.With two-stage diaphragm pumpAll components which come in contact with media are built from chemically resistant fluoropolymerThe durable PTFE design guarantees an superior diaphragm lifespanThe head cover and clamping disc have a stable core made of metal which offers unsurpassed long-term performance of your operational parametersThe direct pump drive (without belt) is exceptionally quiet, creates a very low vibrational environment and reduces the need of wear and tear parts to a minimumThe gas ballast valve has been optimized to prevent media condensing in the pumpThe pumps can be combined with a condenserFor combination with the Hei-VAP Precision Rotary evaporators a vacuum valve is necessary.High suction capacity for fast evacuationSuction capacity for up to 3 rotary evaporators at the same timeDepending on your application you can switch on and off the vacuum pump via switchboxSpecificationsSuction capacity:2 m³/hUltimate vacuum:7 mbarPower input:180 WDimensions (W x D x H):195 x 245 x 310 mmWeight:12.8 kg
Includes secondary condenser and air intake separation vessel. This vacuum system can be applied in many different fields in order to evacuate, evaparate and pump out gases and vapors. Thanks to the emission condenser it is possible to achieve a chemical recovery of almost 100%.Excellent compatibility with chemicals and condensateExcellent ultimate vacuumVery quiet and very low VibrationVery high suction capacity of 50l/minSpecificationsSuction capacity:3 m³/hUltimate vacuum:2 mbarPower input:250 WDimensions (W x D x H):350 x 275 x 495 mmWeight:19.9 kg