Compact Photometer PF-3 Pool | Type: PF-3 Cl2 / pH / Cya / TA
CHF 925.60*
Content:
1
Delivery according to order confirmation
Product number:
6267542
Manufacturer:
Macherey-Nagel GmbH & Co. KG
Weight:
2.05 kg
* Specifications refer to the packaging unit
The LED Photometer PF-3 with micro processor control for evaluation of pre-programmed NANOCOLOR® and VISOCOLOR® ECO tests is ideally suited for mobile operation directly on site in the swimming pool.
Scope of delivery: Photometer PF-3 in VISOCOLOR® reagent case with VISOCOLOR® ECO Chlorine 2 free + total (liquid), pH 6.0 - 8.2, cyanuric acid, alkalinity TA incl. calibration cuvette, 4 empty cuvettes, sample cup, 5 ml syringe, 3 batteries, manual, booklet "VISOCOLOR® ECO Test Instructions for Compact Photometer PF-3" and certificate in a sturdy case.
- Add new tests and parameters anytime
- Self-test and auto calibration
- Insensitive to external light for fast measurement without cuvette slot cover
- Test selection from parameter lists
- Waterproof and sturdy
- Free software for data export
Scope of delivery: Photometer PF-3 in VISOCOLOR® reagent case with VISOCOLOR® ECO Chlorine 2 free + total (liquid), pH 6.0 - 8.2, cyanuric acid, alkalinity TA incl. calibration cuvette, 4 empty cuvettes, sample cup, 5 ml syringe, 3 batteries, manual, booklet "VISOCOLOR® ECO Test Instructions for Compact Photometer PF-3" and certificate in a sturdy case.
| Specifications | |
| Optics: | LED with 3 interference filters |
| Wavelengths: | 450 nm / 530 nm / 590 nm |
| Wavelength accuracy: | ± 2 nm, bandwidth at half transmission 10 ... 12 nm |
| Data memory: | 50 results |
| Cuvette slot: | Round cuvettes 16 mm OD |
| Display: | Backlit graphic display, 128 x 64 pixels |
| Interface: | Mini-USB |
| Dimensions (W x D x H): | 170 x 95 x 68 mm |
| Weight: | 500 g |
| Power supply: | USB interface, batteries, rechargeable batteries or accu-pack |
| IP code: | IP 68 |
| Hazardous Substance Data | |
| GHS | |
| Signal word | Achtung |
| H-Satz | H315, H319 |
| UNNR | 3316 |
| SDS | Link |
| GHS: | GHS07 |
|---|---|
| Manufacturer Article Number: | 934118 |
| Type: | PF-3 Cl2 / pH / Cya / TA |
Similar products
For determining water hardness.Colour change from green to red.*single sealed**3 test each sealedTest strips are also available as individually sealed test strips or as test cards.
The test kits have been specially developed for the analysis of boiler, cooling and service water.
For semi-quantitative determinations.* Test strips with reagent** Box with 60 test strips and reagent*** CE-marked according to the directive for medical products 93/42/EWG.
This test paper allows the quick and easy detection of strong oxidizers such as nitrite and free chlorine. Potassium iodide starch paper is also used to control diazotization reactions. Nitrite or free chlorine oxidize potassium iodide to form elemental iodine which reacts with starch to a blue-violet complex. Potassium iodide starch paper may be used by dipping it into the sample or by applying drops of the sample onto the paper. To detect gaseous oxidizers, the paper is moistened with distilled water and then exposed to the gas in question.
For use, for example, with the Nessleriser systems from Lovibond®.
Watesmo allows the quick and easy detection of water and water vapor in organic solvents.Scope of supply:1 reel (5 m length, 10 mm width)
All test kits are qualified for the analysis of seawater.
All test kits are qualified for the analysis of seawater.* With titration equipment, the measuring range can be extended by additional syringe fillings.