Conductivity Pocket Tester Elite CTS Pin/Cup
CHF 179.20*
Content:
1
Delivery according to order confirmation
Product number:
6290133
Manufacturer:
Thermo Elect.LED GmbH (Eutech)
Packaging information:
Weight:
0.305 kg
Description
The Elite CTS pocket tester simultaneously displays conductivity/TDS/salinity with temperature. Available with Pin or with Cup Sensor. With leakproof, transparent wide-base cap for upright standing with fill line indicator.
Scope of supply:
Elite CTS Pin/Cup: Tester incl. batteries, laynard
Elite CTS Pin/Cup Kit: Tester incl. batteries, laynard, soft carry case, CTS conductivity Standard Sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)
- 1-push calibration
- Large 4-digit double line display
- Backlit graphic display
- Auto-hold readings
- Easy-to-operate, intuitive keypad
- Auto-off
Scope of supply:
Elite CTS Pin/Cup: Tester incl. batteries, laynard
Elite CTS Pin/Cup Kit: Tester incl. batteries, laynard, soft carry case, CTS conductivity Standard Sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)
| Specifications | |
| Conductivity range: | 0.0 … 200.0 µS / 200 … 2000 µS / 2.00 … 20.00 mS |
| Resolution: | 0.1 µS / 1 µS / 0.01 mS |
| Accuracy: Calibration points: | ± 1 % full scale 1 ... 3 points |
| TDS range: | 0.0 … 100.0 ppm / 100 ... 1000 ppm / 100 ... 10000 ppm |
| Resolution: | 0.1 ppm / 1 ppm / 10 ppm |
| Accuracy: Calibration points: | ± 1 % full scale 1 ... 3 points |
| Salinity range: Resolution: Accuracy: | 0 … 10000 ppm 100 ppm ± 1 % full scale |
| Calibration points: | 1 point |
| Temperature range: Resolution: | 0 … 60.0 °C 0.1 °C |
| Accuracy: | 0 … 50 °C (±0.5 °C + 1 LSD) 50 … 60 °C (±1.0 °C + 1 LSD) |
| Operating temperature: Relative humidity: | 5 … 45 °C 5 … 85 %, non-condensing |
| Temperature compensation: | ATC |
| Dimensions (W x L x H): Weight Elite CTS Pin/Cup: | 202 x 45 x 36 mm 160 g / 150 g |
| Power supply: IP code: | 4 x AAA 1.5 V batteries IP 67 |
Properties
| Manufacturer Article Number: | ELITECTSCUP |
|---|---|
| Type: | Elite CTS Cup |
Skip product gallery
Portable conductivity meter ProfiLine Cond 3110 Set 1
From
CHF 1,390.00*
Conductivity meter ProfiLine Cond 3310 Set 1
From
CHF 1,560.00*
Conductivity meters Eutech™ CON150 / CON450
From
CHF 767.90*
Portable conductivity meter ProfiLine Cond 3110
From
CHF 866.00*
Conductivity testers Expert CTS
From
CHF 116.50*
Conductivity meter ProfiLine Cond 3310
From
CHF 1,055.00*
Conductivity meter FiveGo™ F3
From
CHF 493.00*
Conductivity meter Seven2Go™ S3
From
CHF 720.00*
Similar products
Easy to operate rugged conductivity meter for measurement of conductivity and salinity. The ProfiLine hand-held conductivity meters have a waterproof (IP 67) housing and a completely sealed silicone membrane keypad with tactile feedback. Simultaneous display of measurement value and temperature. Large LCD display for easy reading. Automatic nlF compensation for all grades of natural water.Scope of supply: Conductivity meter, case, conductivity measuring cell TetraCon® 325, conductivity standard solution 1413 µS/cm at 25 °C, stand, beaker, short manual, CD-ROM, batteries
Comfortable and versatile conductivity meter with integral, time controlled, data logger and 5000 GLP-compliant record memory for extended data collection. Menu controlled, with backlit, graphics display for comfortable, safe operation. Wide range of conductivity cells attachable. GLP-supporting functions, enhanced choice of cell constants, automatic and manual temperature compensation (which can be switched off) with linear and non-linear functions for pure water and natural waters acc. to EN 27888.Scope of supply: Conductivity meter, case, conductivity measuring cell TetraCon® 325 , conductivity standard solution 1413 µS/cm at 25 °C, stand, beaker, short manual, CD-ROM, batteries, software, USB cable
Best value for a waterproof conductivity meter.Large, three line LCD, view conductivity or TDS measurement with temperature as well as cell efficiencyBuilt-in memory function, stores up to 150 measurements along with temperatureAdjustable temperature coeffcient, set to 0.0 % to meet USP methods for non-compensated measurementsAcoustic indication of necessary recalibrationPower with AA batteries or use optional AC adapterCalibrate using automatically recognized standards or manually, to a single point across all ranges or to multiple points (one calibration point per each conductivity range)Ready indicator, manual or automatic measurement hold feature and optional automatic shut-off functionAdjustable conductivity-to-TDS conversion factor, from 0.4 to 1.0Includes innovative Grip-Clip™, quickly and easily secures the electrode to your beaker or containerAdditional features CON450Backlit displayBuilt-in memory function, stores up to 500 data sets, USB and RS232 outputBuilt-in real-time clock stamps stored data and calibration data with time and date, meets standards for GLP (Good Laboratory Practices)Scope of supply: Meter, conductivity cell (K =1.0), Grip Clip™, 2 x AA batteries, hard carry case, calibration solutions (1 x 1413 µS, 12.88 mS, 84 µS KCL Standard Solutions and 1 x Deionised (Rinse) Water, 60 ml each). CON45003K additionally with USB cableSpecificationsConductivity range:
Resolution:
Accuracy:0 … 200 mS
0.01 µS … 0.1 mS
±1 % full scaleConductivity calibration:Auto / manual, 1 point per rangeTDS range:
Resolution:
Accuracy:0 … 200000 ppm (TDS factor 1.0)
0.01 ppm … 100 ppm
±1 % full scaleTDS calibration:Manual, 1 point per rangeSalinity range (CON450 only):
Resolution:
Accuracy:0 … 50000 ppm
0.01
±1 % full scaleSalinity calibration:Manual, 1 pointTemperature range:
Resolution:
Accuracy:-10.0 … 110.0 °C
0.1 °C
±0.5 °CDimensions (W x L x H):
Weight:83 x 200 x 57 mm
500 gPower supply (CON450 / CON150):Incl. 2 x AA batteries, 300 h / 500 h continuous use, AC adapter (optional)IP code:IP 67Warranty:3 years on the meter
Easy to operate rugged conductivity meter for measurement of conductivity and salinity. The ProfiLine hand-held conductivity meters have a waterproof (IP 67) housing and a completely sealed silicone membrane keypad with tactile feedback. Simultaneous display of measurement value and temperature. Large LCD display for easy reading. Automatic nlF compensation for all grades of natural water.Scope of supply: Conductivity meter, short manual, CD-ROM, batteries
For accurate measurement of conductivity, TDS, and salinity in one single instrument, making it an ideal solution for many applications.Large 4 digit double line displayDisplay of battery life, status and re-calibrationAutomatic temperature compensation (ATC)Auto conductivity buffer recognition and calibrationSelectable TDS factor: 0.40 to 1.00Auto offSpecificationsConductivity range:0.00 … 20.00 mS/cmResolution:10 µS/cm below 2.00 mS/cm,
0.10 mS/cm above 2.00 mS/cmAccuracy:±2 % full scale ±1 LSDTDS range:0 … 20000 ppmResolution:10 ppm below 2000 ppm, 100 ppm above 2000 ppmAccuracy:±2% full scale ±1 LSDSalinity range:
Resolution:
Accuracy:0 … 10000 ppm
100 ppm
±2 % of full scale ±1 LSDCalibration points:1 per parameterTemperature range:
Resolution:
Accuracy:0 … 50 °C
0.1 °C
±0.5 °C + 1 digitOperating temperature:5 … 45 °CDimensions (W x L x H):
Weight:45 x 170 x 30 mm
90 gPower supply:Incl. 4 batteries (A76 or LR44 equivalent)IP code:IP 67Warranty:1 year
Comfortable and versatile conductivity meter with integral, time controlled, data logger and 5000 GLP-compliant record memory for extended data collection. Menu controlled, with backlit, graphics display for comfortable, safe operation. Wide range of conductivity cells attachable. GLP-supporting functions, enhanced choice of cell constants, automatic and manual temperature compensation (which can be switched off) with linear and non-linear functions for pure water and natural waters acc. to EN 27888.Scope of supply: Conductivity meter, short manual, CD-ROM, batteries, software, USB cable
Portable conductivity meter for field work.Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicksErgonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfacesIP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environmentsScope of supply: Meter only
Portable routine model for conductivity measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsEasy 1 point calibration with option of manual cell constant entry3 predefined standards and 1 user defined standardAutomatic, manual and time dependant endpoint recordingData memory storage for 200 data pointsPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply:S3-Meter: Includes instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity, batteriesS3-Standard kit: As S3-Meter, but also with InLab 738-ISM and sachets of conductivity standards 1413 µS/cm and 12.88 mS/cmS3-Field kit: As S3-Standard kit, but also with bottles for calibration, uGo™ carrying caseS3-Bioethanol kit: As S3-Field kit, but also with InLab 725 instead of InLab 738-ISMConductivity
Measuring range:
Resolution:
Accuracy:
0.010 µS/cm … 500 mS/cm
0.001 ... 1 (auto-range)
± 0.5%Temperature
Measuring range:
Resolution:
Accuracy:
-5.0 ... 105.0 °C
0.1 °C
±0.2 °CTDS (Total Dissolved Solids)
Measuring range:
Resolution:
Accuracy:
0.01 mg/l ... 300 g/l
0.01 ... 1 (auto-range)
±0.5 %Specific resistance
Measuring range:
0.01 ... 100.0 MΩcmSalinity
Measuring range:
0.01 ... 42 psu