Deep-well plate system, Riplate® | Type: Deep-well 96, PP - 1.0ml medio
CHF 181.70*
Content:
32
| Quantity | Unit price |
|---|---|
| To 11 |
CHF 181.70*
|
| From 12 |
CHF 164.50*
|
Delivery according to order confirmation
Product number:
9284295
Manufacturer:
Ritter GmbH
Length:
270 mm
Width:
188 mm
Height:
237 mm
Weight:
1.2 kg
* Specifications refer to the packaging unit
Riplate® round wells - Standard in Multifunction
Raised wells reduce the risk of cross-contamination and increase the security of hot sealing or sealing with adhesive foils. Riplate® 1ml is ideal for use in a thermocycler or for defrosting of samples in a hot-water bath. The U-shaped well bottom reduces the death-volume.
Riplate® square wells - For a Maximum in Capacity
Riplate® SW have been developed for optimal use of capacity when it comes to sample storage. Due to the SBS-format the outside dimensions of Riplate® are given. Form follows function: the construction of cavities is crucial for a maximum absorption of liquids.
Riplate® medio - Saves 50% of Storage Capacity
Due to the compact construction of Riplate® medio less than 50% stacking size is needed. Higher well rims allow an airtight closure or sealing of Riplate® medio. The alphanumeric marking allows registration and identification of single assays.
Riplate® 384 - Optimized for Smaller Volumes
Available in PS and PP for automated screening and storage systems. Alphanumeric marking for identification of samples. Round cavities for reduced capillary forces. With flat well-bottom - ideal for microscopic and optical applications.
Field of application: screening, sample storage et al. Ritter Riplate® systems are in line with the SBS-standard and are suitalbe for automation systems with corresponding closing- and sealing-mechanism.
Raised wells reduce the risk of cross-contamination and increase the security of hot sealing or sealing with adhesive foils. Riplate® 1ml is ideal for use in a thermocycler or for defrosting of samples in a hot-water bath. The U-shaped well bottom reduces the death-volume.
Riplate® square wells - For a Maximum in Capacity
Riplate® SW have been developed for optimal use of capacity when it comes to sample storage. Due to the SBS-format the outside dimensions of Riplate® are given. Form follows function: the construction of cavities is crucial for a maximum absorption of liquids.
Riplate® medio - Saves 50% of Storage Capacity
Due to the compact construction of Riplate® medio less than 50% stacking size is needed. Higher well rims allow an airtight closure or sealing of Riplate® medio. The alphanumeric marking allows registration and identification of single assays.
Riplate® 384 - Optimized for Smaller Volumes
Available in PS and PP for automated screening and storage systems. Alphanumeric marking for identification of samples. Round cavities for reduced capillary forces. With flat well-bottom - ideal for microscopic and optical applications.
Field of application: screening, sample storage et al. Ritter Riplate® systems are in line with the SBS-standard and are suitalbe for automation systems with corresponding closing- and sealing-mechanism.
| Type: | Deep-well 96, PP - 1.0ml medio |
|---|
Similar products
Screening, sample storage et al. Ritter Riplate® systems are in line with the SBS-standard and are suitalbe for automation systems with corresponding closing- and sealing-mechanism.Riplate® SW have been developed for optimal use of capacity when it comes to sample storage. Due to the SBS-format the outside dimensions of Riplate® are given. Form follows function: the construction of cavities is crucial for a maximum absorption of liquids.
Developed for a range of uses, e.g. High-Throughput Screening (HTS), general analysis which requires a master reservoir plate, cell and tissue culture, sample storage, etc. Deep well plates can be used with all leading robotic systems and other autosampling devices.96 well: 12 x 8 array, 384 well: 24 x 16 arrayHigh chemically-resistant polypropylene (e.g.: against DMSO, phenol, chloroform)ANSI/SLAS formatAlphanumeric well codingPlates suitable for freezing down to -80°C (PP) or -20°C (PS)One notched corner ensures correct orientation.StackableDNA-, RNase-, DNAse -free
Suitable for test preparation and for storage and transport of samples.ClearProduced under clean room conditionsCompatible with automated systemsRNase und DNase free
The pre-slit sealing mats are designed for use with shared wall microtiter plates and allow penetration into the well using a pipette tip or probe without damaging the caps. To store chemicals or compounds and to prevent contamination and evaporation of the well contents.Chemical resistantSolvent-resistantPierceableTemperature resistant down to -80 °C
The plates are suitable for agglutination tests, sample collection and storage.TransparentRound bottom for optimal sample recoveryAlphanumeric grid allows quick and easy identification of samplesFor use with robots and liquid handling systemsCan be closed with sealing mats and adhesive foil
High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.Clear wellsFrame, white or colouredHigh-contrast, alphanumeric letteringAutoclavable (121 °C, 20 min)Centrifugation resistance up to 6000 × gRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing, even with heat sealingStackablePCR clean: free of human DNA, DNase, RNase and PCR inhibitors
High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.Clear wellsFrame, white or colouredHigh-contrast, alphanumeric letteringAutoclavable (121 °C, 20 min)Centrifugation resistance up to 6000 × gRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing, even with heat sealingStackable
DNA LoBind plates for maximum sample recovery from nucleic acids by reducing the binding of the sample to the surface. Suitable for preparation or storage of DNA and RNA samples, forensic trace analysis, preparation of dilution series in quantitative qPCR, sample preparation in next-generation sequencing and creation of genome or oligonucleotide libraries.PCR clean: free of human DNA, DNase, RNase and PCR inhibitorsHigh-contrast, alphanumeric letteringFrame white or blueRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing