Filter Storage Bottles Nalgene™ Rapid-Flow™, PS, sterile | Type: 455
CHF 185.80*
Content:
24
Delivery according to order confirmation
Product number:
4675558
Manufacturer:
Thermo Elect.LED GmbH (Nalge)
Length:
397 mm
Width:
294 mm
Height:
270 mm
Weight:
2.01 kg
* Specifications refer to the packaging unit
Easy-to-use ergonomic design. Can be used to store sterilised filtrate. Radiation-sterilised to save you time and minimize contamination. Also handy as presterilised, single-use storage containers. 1-1/2-turn threaded screw closure guarantees a leakproof seal and eliminates pH shift in receivers. Certified. Pyrogen-free, non cytotoxic. Sterile, graduated and leakproof.
| Thread GL: | 45 |
|---|---|
| Type: | 455 |
| Volume ml: | 250 |
Similar products
Filters securely screw onto glass media bottles with 33 mm or 45 mm neck sizes. Allows direct filtration of liquid into sterile glass media bottles.Tight and secure thread connection for vacuum filtration, vacuum tubing to be connected onto tubing adapter of side-arm. Graduated. Certificate of quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
These bottle-top filter units are ideally suited for the separation or purification of samples which are contained in large volumes. The units are available with either 0.22 µm or 0.45 µm pore sizes and 3 different volumes (250, 500 and 1000 ml).Features:Bottle-top filter and reservoir bottle are includedLight weight and stable wall constructionLarge knurls on the reservoir bottle cap for easy screwingWide bottle mouth for efficient pouring outVolume graduationHose connector fits multiple diametersPyrogen-freeMembrane material: Polyethersulfone (PES)
Ideal for biological and pharmaceutical sterile filtration. PES membrane features low protein binding, low level of extractables and a high flow rate. Now available in three pore sizes: The best filter units with 0.20µm and 0.45µm pore size and new to the protection of valuable cell cultures from mycoplasma with 0.10µm pore size. Filter top and filtrate bottle are graduated. Blue color-coded collar with cellulosic vent plug side arm and quick-disconnect tubing adapter. Leakproof, sterile screw closure included for storage of sterile filtrate. Sterile, single packed. Certificate of Quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability.
Tissue culture filters for screw fitting onto bottles with 33mm or 45mm neck diameters. With surfactant-free, cellulose acetate membrane (SFCA) and polystyrene (PS) housing. Gamma-irradiated sterile. Pyrogen-free. Non cytotoxic. Low-pressure filtration can be carried out directly into a suitable sterile bottle. Caution: Only use sterile bottles authorised for use in low pressure applications. Always wear protective equipment for low pressure procedures. The membrane is characterised by its low protein binding, good throughput rates and minimal clogging with negligible protein loss. Permanent, moulded graduations. Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6mm to 9mm. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Disposable syringes with PP barrel, and PE piston.Sterile, individually blister strip packedWipe-resistant scaleTransparent cylinderPyrogen-free, non-toxic and PVC-free
Filter units with receiver for sterile filtration of aqueous solutions and media, particularly cell culture. Simple and safe to handle. The integral polyethersulfone (PES) membrane guarantees extremely good throughput times and low protein binding, making it ideal for filtering proteinaceous solutions. The receiver is supplied with a flexible vacuum tubing adapter (for sterile versions only) and a lid.
Compact Nalgene™ filter units with PES membrane are ideally suited for quick filtration of samples between 50 to 100 ml.Unitary construction with non-separable upper and receiver componentsPadless membrane support minimizes foaming of proteinaceous samplesPyrogen-freeSterile
Sterile vacuum filters for screwing directly onto sterile bottles. Disposable units for sterile filtration of media and aqueous solutions. The special polyethersulphone (PES) membrane produces extremely good throughput times and low protein binding, making it ideal for cell culture applications. With GL45 screw connection for all standard bottles.Caution: Only use sterile bottles authorised for use in low pressure applications.