Filter for behropur® mixed-bed ion exchanger | Type: FG 130
CHF 163.20*
Content:
1
Delivery according to order confirmation
Product number:
9915736
Manufacturer:
Behr Labor-Technik GmbH
Weight:
0.726 kg
* Specifications refer to the packaging unit
Filter for pressure-resistant behropur® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance.
Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.
FG 130 behropur® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°C
FE 130 behropur® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°C
AF 130 behropur® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C
Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.
FG 130 behropur® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°C
FE 130 behropur® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°C
AF 130 behropur® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C
| Type: | FG 130 |
|---|
Accessories
Behr Labor-Technik GmbH
Mixed-bed ion exchanger made of stainless steel
Standard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit controlSpecificationsE 28 / E 40 dExchange capacity* at 10°dH2800 litres / 4000 litresFlow max. litres/hour500 / 700Diameter in cm 24 / 24Height incl. LF in cm74 / 84Height of cartridge only in cm60 / 70* Limit value 20 µS/cm
Similar products
Filter for pressure-resistant behropur® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance.Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.FG 130 behropur® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°CFE 130 behropur® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°CAF 130 behropur® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C
* Interval of exchanges depends on raw water quality and throughput
For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard control and monitoring unit OptiFilltouch, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Digital control and monitoring unit OptiFilltouch with colour touch displayReal-time TOC monitoringAdjustable limit values for conductivity and TOCInnovative monitoring and display of cartridge capacityWithdrawal volume individually adjustablePermanent data storage of all quality parametersPassword access and error memory3 languages selectable: DE, EN, FRRS232 and USB interfaceLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentCan be operated with laboratory glovesApplications:OmniaPure xstouch UV-TOC: Ultra trace analysis, ICP-MS, HPLC, TOC analysisOmniaPure xstouch UV-TOC/UF: Molecular and microbiology, cell culture mediaScope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minDispensing volume:0.05 ... 25 lResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlRNase (with UF module):1 pg/mlDNase (with UF module):5 pg/mlProteases (with UF module):0.15 µg/lFeed water conductivity at 25 °C:100 µS/cmDimensions incl. OptiFilltouch dispenser (W x D x H):240 x 435 x 530 mmWeight incl. OptiFilltouch dispenser:14 kgPower supply:90 ... 240 V, 50 ... 60 Hz
