Gel / PCR / DNA Small Fragment Extraction Kit | For: 100 preps
CHF 281.90*
Content:
1
Delivery according to order confirmation
Product number:
4668469
Manufacturer:
IBI Scientific
Length:
188 mm
Width:
145 mm
Height:
137 mm
Weight:
0.4 kg
* Specifications refer to the packaging unit
The test kit was developed to obtain or concentrate DNA fragments from agarose gels, PCR or other enzymatic processes.
The agarose gel is dissolved, the enzymes are denatured and the DNA fragments will bind to the glass fibre matrix in the spin column. Wash buffers (containing ethanol) are used to remove contaminants and a low salt elution buffer is used to recover the purified DNA fragments. Recoveries are up to 90 % for gel extraction and up to 95 % for PCR clean-up. With this kit, PCR purification and gel extraction procedures can be performed, so that a second test kit is not necessary.
The agarose gel is dissolved, the enzymes are denatured and the DNA fragments will bind to the glass fibre matrix in the spin column. Wash buffers (containing ethanol) are used to remove contaminants and a low salt elution buffer is used to recover the purified DNA fragments. Recoveries are up to 90 % for gel extraction and up to 95 % for PCR clean-up. With this kit, PCR purification and gel extraction procedures can be performed, so that a second test kit is not necessary.
- High recovery rate
- Short process time
- One test kit for two methods
| Specifications | |
| Sample size: | up to 300 mg of agarose gel / up to 100 µl of PCR product |
| Elution volume: | 20-50 µl |
| Fragment size: | 50 bp - 200 bp |
| Typical yield: | 90-95 % gel extraction and PCR clean-up |
| Operation Time: |
| For: | 100 preps |
|---|---|
| Manufacturer Article Number: | IB47061 |
Similar products
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer. The test kit contains the I-Blue Lysis Buffer, an optional colour indicator. The use of this indicator prevents common handling errors that impair efficient cell lysis and neutralization.Fast extraction timeHigh yieldPrevention of handling errors during cell lysis and neutralisation by I-Blue colour indicatorSpecificationsI-Blue Mini Plasmid Kit // I-Blue Midi Plasmid KitMethod:Spin column // Anion-ExchangeSample size:1 - 7 ml // 50 - 100 ml high-copy plasmid / 100 - 150 ml low-copy plasmidBinding capacity:50 µg // 500 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:up to 50 µg // 200 - 500 µgOperation Time:15 min. // 80 min.
The test kit was developed to obtain or concentrate DNA fragments from agarose gels, PCR or other enzymatic processes.The agarose gel is dissolved, the enzymes are denatured and the DNA fragments will bind to the glass fibre matrix in the spin column. Wash buffers (containing ethanol) are used to remove contaminants and a low salt elution buffer is used to recover the purified DNA fragments. Recoveries are 90 - 95 % for PCR clean-up. With this kit, PCR purification and gel extraction procedures can be performed, so that a second test kit is not necessary.High recovery rateShort process timeOne test kit for two methodsSpecificationsSample size:up to 300 mg of agarose gel / up to 100 µl of PCR productBinding capacity:10 µg DNAFragment size:10 kbTypical yield:80-90% gel extraction / 90-95% PCR clean-upOperation Time:20 min.
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.SpecificationsMini Kit // Midi KitMethod:Spin column // Anion-ExchangeSample size:1 - 5 ml // 50 ml high-copy plasmid / 100 ml low-copy plasmidBinding capacity:30 µg // 800 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:10- 30 µg // 200 - 800 µgOperation Time:15 min. // 120 min.
Spin column system consisting of filter tubes with glass fibre filter and collection tubes. For the use of leftover reagents from IBI I-Blue MINI Plasmidpurification-Kits (IB47170, IB47171, IB47172), Gel / PCR / DNA Fragment Extraction Kits (IB47010, IB47020, IB47030), Plasmidpurification-Kits High-Speed MINI (IB47101, IB47102) or similar products from other suppliers using a binding, washing and elution method. Sample size, binding capacity and elution volume listed in the specifications must be observed.SpecificationsGel Fragment Extraction Kit // Plasmidpurification-KitsSample size:300 mg agarose gel / 100 µl PCR product // 1 - 4 ml bacterial cultureBinding capacity:up to 10 µg // up to 30 µgElution volume:20 - 50 µl // 50 - 100 µl
For rapid and efficient extraction of plasmid DNA from bacterial cells. The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.Fast extraction timeHigh yieldStandard version or endotoxin-free version (
Sileks nucleic acid isolation kits provide reliable and reproducible results thanks to specially designed Sileks MagNA™ and SileksMagNA-G™ magnetic nanoparticles and optimized buffer systems. DNA/RNA purification using magnetic particles allows a standardised nucleic acid isolation due to the high absorption capacity of nano particles. The surface of the Sileks nano particles have been optimized for the isolation of DNA/RNA from different sources such as blood, plasma and cell cultures. Isolated DNA and RNA can then be used in PCR as well as in any other molecular biology application (first strand cDNA synthesis, labeling, cloning, sequencing etc.).Each isolation kit allows for 100 isolations.Scope of supply (Isolation Kits): Magnetic bead particles for each specified application, relevant buffers and instruction protocols.*Please order buffers separately.
Rack suitable for all magnetic separation experiments involving affinity ligands separation of e.g. antibodies and nucleic acids.Model for 1.5 / 2.0 ml, 5 ml / 15 ml and 50 ml tubesIndependent and rotatable sleeves with powerful magnets on 50 ml and 1.5/5 mlEasy removal of liquids96-well PCR plate model has 24 magnetsFlat bottom microplate model has magnets covering entire footprint to accept all standard micro-plates with any number of wells; 6, 12, 24, 48, 96 etc.Racks fit microplates following ANSI standardsClear acrylic allows unobstructed view of tube contents