Grinding balls silicon nitride

Manufacturer Article Number:	55.0300.31
Material:	Silicone nitride
UNSPSC:	41-10-17-01
Ø:	30 mm

Other customers also bought

Fritsch GmbH

Grinding balls, agate

Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).

From CHF 9.10*

Fritsch GmbH

Grinding balls, zirconium oxide

Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).

From CHF 6.30*

Fritsch GmbH

Grinding balls, hardmetal tungsten carbide

Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).

From CHF 10.40*

Fritsch GmbH

Grinding balls, hardened, stainless steel

Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).

From CHF 3.10*

Fritsch GmbH

Grinding balls, sintered corundum

Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1mm to 3mm (to achieve a fineness down to the nanometer-range).

From CHF 30.50*

Similar products

Grinding balls, zirconium oxide

Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).

From CHF 6.30*

Grinding balls, PTFE with steel core

From CHF 156.00*

Ring sieves for Ultra Centrifugal Mill ZM 200

From CHF 217.00*

Grinding balls, stainless steel

From CHF 3.00*

Grinding Jars for Mixer Mill MM 400

With screw cap.Simple and safe handlingDust and air-tightSuitable for wet and cryogenic grinding

From CHF 656.00*

Accessories for Knife Mill GM 200/300

From CHF 24.90*

Grinding balls, tungsten carbide

From CHF 19.60*

Knife mill HM100

The HM100 knife mill is used for grinding soft, medium-hard, brittle and fibrous materials. Especially suitable for samples with a high water, oil or fat content. The 2 knives are driven by a 900 W motor to achieve a reliable grinding result. Suitable for applications in agriculture, biology, medicine and food technology.For soft, elastic, fibrous, aqueous, oily or fatty samplesElectronically controlled speedSamples are grinded in only 10 to 30 secondsUp to 700 ml sample volumeAutoclavable grinding vesselsGrinding vessels available in various materialsCutting knives with 2 stainless steel and titanium blades availableEasy operationQuick startCoarse and fine grinding in one stepInterval, reverse and manual mode availableScope of supply: Knife mill, 1 l grinding vessel made of plastic (autoclavable), lid, stainless steel knife

From CHF 5,115.00*

Batch mills Tube Mill control / Tube Mill 100 control

Suitable for disposable and reusable grinding chambers. By using the disposable grinding chambers the possibility of cross-contamination and the effort of cleaning is eliminated. The mills can be used for hard (Mohs hardness up to 5), dry and brittle materials. They are especially suitable for grinding seeds, such as corn and wheat. Increased safety, the operation of the mill is only possible with properly closed grinding chamber and closed lid.Clearly arranged, multilingual OLED-displayUSB interface for control and documentation of all the parametersInterval operation availableStepless adjustable speedAdjustable safety speed and timeProgrammable and storable test conditionsReproducible test resultsTimerEasy operation with touch keypadDust proof sealed housingQuiet operationScope of supply:Tube Mill control: incl. 1 x grinding chamber MT 40 and MMT 40.1 eachTube Mill 100 control: incl. 1 x grinding chamber MT 40, MT 100 and MMT 40.1 each

From CHF 2,714.00*

Grinding jars EasyFit PM 300

For all planetary ball mills PM.

From CHF 680.00*

Grinding balls, silicon nitride