Homogenisers with PTFE or glass pestles | Capacity ml: 30

For use with all homogeniser drive-units or for schuett homgen^plus.
Homogenisers and pestles provide a precise shape and are consequently separately exchangeable. Clearance between pestle and homogeniser is between 0.18 and 0.23 mm.

Homogeniser with PTFE pestle
Tapered or cylindrical. Shaft made of stainless steel. Inert. Elastic. With smooth, wax-like, moisture-rejecting surface. Resistant against high temperatures. Also available as glass fiber reinforced model. Highly efficient with especially tough tissue.

Homogeniser with glass pestle
Tapered or cylindrical. With robust glass shaft. Ground-glass surface in cylindrical/tapered part. Highly efficient with tough tissue.

Homogenizers and pestles also available individually as spare parts.

Glass mortar Type 1:	With flared overflow neck and spout, conical
Glass mortar Type 2:	Without flared overflow neck, cylindrical
Glass mortar Type 3:	With flared overflow neck and spout, cylindrical
Glass mortar Type 4:	Round bottom, with flared overflow neck, without spout, cylindrical

*glass-fibre reinforced

Capacity ml:	30
Figure:	1
Form:	PTFE pestle cylindrical
Glass mortar type:	2

Preview	Product number	Capacity ml	Figure	Form	Glass mortar type	Content	Unit price	Delivery time	Buy

Accessories

Bohlender GmbH

Ground Joint GL Adapters, PTFE

Black, PPS screw cap with GL45 thread or blue PP, screw cap with GLS80 thread, movable insert with ground joint made of PTFE. Transition from a ground joint to a glass thread. The body can be turned independently from the screw cap. The complete, assembled adapter can be removed and fixed onto another bottle without the risk of disarranging the tubing. Very good chemical resistance, for working temperatures up to max. +250 °C.

From CHF 65.50*

Similar products

LLG-Micropestles, stainless steel

Polished stainless steel, micropestles. Precisely fitted for Eppendorf Safe-Lock Tubes™, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate displacement due to tapered piston.For Reaction tubes:For homogenisation of cells, tissues or foodstuffs / feed samples.For tubes with 0.5 ml, 1.5 ml, and 2.0 mlCan be cooled down to -196 °CSterilisable in an autoclave or dry heat at 200 °CSuitable for PCR applicationsAlternative to single-use plastic pestlesPerfectly suitable for Eppendorf Safe-Lock Tubes

From CHF 49.90*

Micro pestles, accessory drive motor

From CHF 15.70*

Disposable Pellet pestles, PP, with reaction tube

Autoclavable polypropylene. Suitable for battery-operated drive motor (9.314 496). Pestle length 7cm. Supplied with reaction tube, except Cat. No. 9.314 492 and 9.314 493.

From CHF 154.00*

Dounce homogenizers

Glass. Suitable if the nuclei are to be maintained after homogenising.Two pestles are supplied:Pestle "A" for pre-grindingPestle "B" for fine grindingSpare components are available and are completely interchangeable.* Mortar length (mm)

From CHF 283.00*

Homogenisers, Dounce, glass

For fine particle size reductions without damage to cell nuclei. Supplied with interchangeable pestles ground and polished to large' and small' clearances for use in the same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.

From CHF 447.50*

Spare components for dounce homogenizers

Glass. Suitable if the nuclei are to be maintained after homogenising.Pestle "A" for pre-grindingPestle "B" for fine grinding

From CHF 70.40*

Potter-elvehjem homogenisers, Borosilicate glass

Potter-elvehjem homogenisers are designed to work with soft tissuePrecision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityPTFE PestleStandard stainless steel rod for use with an electric motorOptional stainless steel handle for manual grindingAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.076 to 0.126mm

From CHF 141.40*

Micro pestles, CTFE / stainless steel

Reusable, for 500µl and 1.5ml reaction tubes. Autoclavable CTFE / stainless steel. Suitable for battery-operated drive motor (9.314 496).

From CHF 192.00*

Homogenisers, Mini series, borosilicate glass 3.3

Manufactured from high quality borosilicate glass this range of mini homogenisers is ideal for micro tissue work. Bodies are clear precision glass. Pestles have ground glass working length. With or without handles. Fully autoclavable.Grinding clearance pestle and mortar 0.152mm to 0.254mm.

From CHF 109.00*

Homogenisers, Griffiths tube, Borosilicate glass 3.3

For grinding bacterial emulsions and tissues. Rounded pestle and mortar ends, ensure perfect grinding. Autoclavable. Large Griffiths tube is ideal for coarse material.

From CHF 103.10*