In-line valves | Type: VS 16
CHF 498.00*
Content:
1
Delivery according to order confirmation
Product number:
9882931
Manufacturer:
Vacuubrand GmbH & Co.KG
Weight:
0.664 kg
* Specifications refer to the packaging unit
Butterfly design. Housing made of stainless steel with fluoroelastomer seal. Two Buna-N rings act as rotary shaft seals. Helium leak-tested. Leak rate 1 x 10-6 mbar x l/s. Excellent throughput.
| Description: | KF DN 16 |
|---|---|
| Type: | VS 16 |
| Valve bore mm: | 16 |
Similar products
Flanged tubing nozzles, aluminium. For Type KF small flange.
The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!
Oil for rotary vane pumps B: Standard pump oil. High viscosity, low vapour pressure, good chemical resistance.Oil for rotary vane pumps K 8: For acid vapours. Strongly hygroscopic, with limited capacity for water vapour. Pump must be factory-adjusted to accept this oil.Perfluorpolyether oil: Synthetic Oil. Certified for pumping pure oxygen.
Small flanges. Stainless steel. With male or female conical ground joints and DN flange as outlined below.
Stainless steel/FPM (e.g. Viton®). For Type KF small flange.
Flanged at both ends. For Type KF small flange. B1 = Minimum radius for one-off bending.B2 = Minimum radius for repeated bending.