Interior lighting for constant climate chambers KBF PRO
CHF 1,507.00*
Content:
1
Delivery according to order confirmation
Product number:
6523273
Manufacturer:
BINDER GmbH
Packaging information:
Description
Interior lighting with climate-resistant LEDs, switches when the unit door is opened.
Properties
| For: | KBF PRO 720, 1060 |
|---|---|
| Manufacturer Article Number: | 8012-2566 |
Skip product gallery
Growth chambers KBW, KBWF series | Type: KBWF 240
CHF 9,999.00*
Constant climate chambers KBF-S ECO
From
CHF 14,797.00*
Material test chamber FP series
From
CHF 4,042.00*
Dynamic climate chambers MK
From
CHF 19,837.00*
Dynamic climate chambers MKF, with humidity control
From
CHF 23,459.00*
Similar products
Homogeneous lighting conditions with constant temperature and humidity conditions, the BINDER growth chambers. The responsive humidification system, the high-performance cooling and uniform light distribution ensure optimal growth conditions.KBW Series: Growth chambers with lightKBWF Series: Growths chambers with light and humidityEquipment:Electronically controlled APT.line™ preheating chamberTemperature range 0 °C to 70 °C (without humidity and illumination)Humidity range 10 % to 80 % RH (KBWF)Variable position illumination cassettes each with 5 daylight fluorescent illumination tubesController with time-segment and real-time programmingHumidity regulation with capacitative humidity sensor and vapor humidification (KBWF)Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarmInterface: Ethernet, RS 485 (optional)
Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. Particularly energy-efficient and low-noise thanks to Peltier technology with patented heat dissipation.Homogeneous climate even with full loadElectronically controlled APT.line™ preheating chamber technologyTemperatures up to 28 °C below ambient temperature possibleInner chamber made completely of stainless steel2 stainless steel grids incl. shelf supportAccess port with silicone plug Ø 30 mm, left sideUnit self-test for comprehensive status analysisLCD display for indication of temperature, humidity, alarms and additional informationInternal data logger with USB interfaceIndependent water supply via canisters
The material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.High temperature accuracy due to APT.line™ technologyAdjustable fan speedController with interval and real-time programmingUser-friendly controller with large displayElectromechanical control of the exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controllerModels up to 115 l stackableErgonomic handle designComputer interface: EthernetInternal data logger, measured values can be read out in open format via USB
Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsHeated viewing window with LED interior lightingBINDER Multi Management Software APT-COM™ Basic EditionClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmEthernet interfaceAdjustable ramp functionIntegrated chart recorderDoor heatingInner chamber made of stainless steel1 stainless steel rackCFC-free refrigerant R-452AModels with 480 V nominal voltage are equipped with a voltage and frequency converter.
Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsHeated viewing window with LED interior lightingBINDER Multi Management Software APT-COM™ Basic EditionClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmEthernet interfaceAdjustable ramp functionIntegrated chart recorderDoor heatingInner chamber made of stainless steel1 stainless steel rackHumidity regulation with capacitive humidity sensor and responsive steam humidificationAutomatic water and wastewater managementIntegrated 20 l water storage tank4 zero-voltage relay contactsCFC-free refrigerant R-452AModels with 480 V nominal voltage are equipped with a voltage and frequency converter.