LLG-PCR adhesive film and foil | Description: PCR film

Manufactured from high density polypropylene which is fully autoclavable. Excellent rack for "before" and "after" PCR sampling.This rack can be used alone or inserted in the workstation.This working/storage rack is designed to accommodate 96 pieces 0.2 ml PCR tubes or strips of 8 and 12 tubes.Tube wells are easly identified with alphanumeric,embossed numbers and letters.Translucent clear cover protects the tubes from dust and has a non-slip surface to allow safe storage of multiple racks.Dimensions (W x D x H): 125 x 88 x 31 mm

For micro test plates, deep well plates, micro test tubes and 96/384 Well PCR plates. DMSO resistant.For manual useTemperature resistant from -80 to 120 °CAdhesive of PP and aluminium foils with high solvent and DMSO resistanceAll films in SBS standard format

For 0.2 ml Thermocycler blocksWith domed or flat capMade of high quality polypropylene, RNase-, DNase- and Endotoxin-free

BRAND has significantly expanded its product range of extra-thin-wall disposable products, which were specially developed to satisfy the demands of PCR applications.Quality featuresSuitable for use in common thermocyclersPP, extra-thin uniform wall thicknesses to provide the optimal thermal transfer and short cycle times96-well PCR plates with blue alphanumeric code and cut corner markingHighly clear flat covers optimally suited for qPCRDNase-, DNA- and RNase-freeAutoclavable at 121°C (2 bar), acc. DIN EN 285qPCR: Products which are suitable for Real Time PCR (qPCR)White PCR products offer significantly better results for qPCR, and are specifically recommended by many thermocycler manufacturers.The strips of 8 PCR tubes with attached, flat single caps provide an ideal protection against contamination. The highly transparent cap makes them ideal for a quantitative Real Time PCR. Available in Standard (0.2 ml) or Low Profile (0.15 ml). BIO-CERT® PCR QUALITY.

For use in any molecular biology application. Nuclease-free water is pure, quality-tested water suitable for use in all experiments that require nuclease-free water, including molecular biology applications. Nuclease-free water is prepared in a proprietary process, which yields DNase, RNase, and nuclease-free, deionized water without the use of chemical additives, such as diethylpyrocarbonate (DEPC). Nuclease-free water is provided in nuclease-free containers.

BRAND has significantly expanded its product range of extra-thin-wall disposable products, which were specially developed to satisfy the demands of PCR applications.Quality featuresSuitable for use in common thermocyclersPP, extra-thin uniform wall thicknesses to provide the optimal thermal transfer and short cycle times96-well PCR plates with blue alphanumeric code and cut corner markingHighly clear flat covers optimally suited for qPCRDNase-, DNA- and RNase-freeAutoclavable at 121°C (2 bar), acc. DIN EN 285qPCR: Products which are suitable for Real Time PCR (qPCR)White PCR products offer significantly better results for qPCR, and are specifically recommended by many thermocycler manufacturers.Eight 0.2 ml PCR tubes joined together in a strip with attached, hinged 8-cap strips. PP. The hinged, domed cap makes opening and closing the tubes with one hand easier.

BRAND has significantly expanded its product range of extra-thin-wall disposable products, which were specially developed to satisfy the demands of PCR applications.Quality featuresSuitable for use in common thermocyclersPP, extra-thin uniform wall thicknesses to provide the optimal thermal transfer and short cycle times96-well PCR plates with blue alphanumeric code and cut corner markingHighly clear flat covers optimally suited for qPCRDNase-, DNA- and RNase-freeAutoclavable at 121°C (2 bar), acc. DIN EN 285qPCR: Products which are suitable for Real Time PCR (qPCR)White PCR products offer significantly better results for qPCR, and are specifically recommended by many thermocycler manufacturers.Strips of 8 or 12 connected PCR tubes (0.2 ml). Cap strips consisting of 8 or 12 domed caps (available separately) provide tight seal during all PCR cycles, thus protecting samples from cross-contamination. The tubes have a holding strap at one end, and the cover strips on each lid have a small lip on the side for careful, contamination-free opening. Consistent tube wall thickness allows rapid heat transfer along the entire exterior tube surface. Made of pure, virgin polypropylene, free from RNase-, DNase- and DNA. Autoclavable at 121 °C (2 bar), according to DIN EN 285.Other colors on request.

Individual tubesCompatible with all common thermocyclers0.2 ml or 0.5 mlIndividual attached flat or domed snap capsConsistent wall thickness for uniform heat transferCap design ensures fit and helps reduce sample evaporationVirgin polypropylene, certified RNase-, DNase- and Endotoxin-free

Removable hinged lid lies flat. Perfect for pre- or post-PCR sampling. Sturdy polypropylene rack accommodates individual 0.2ml tubes or strips of 8 or 12 tubes. Tube wells are easily identified with embossed numbers and letters. Autoclavable.

Polypropylene tubes for PCR experimentsProduct characteristics of 0.2ml PCR tube: Contamination shield on attached lidDefined lid position (90°) due to special hingeHighly transparentTight sealingEasy to openCan be used in all thermal cyclers with 0.2ml block formatCertified being free from human DNA, DNase, RNase and PCR inhibitorProduct features of thin-walled 0.5ml PCR tube: frosted writing surfaceAutoclavable when open (at 121°C for 20 mins.)Highly transparentEasy to openCan be used in Mastercyclers with 0.5ml block formatCertified being free from human DNA, DNase, RNase and PCR inhibitor