LLG-Trolleys, Stainless Steel | Description: 2 shelves, vertical spacing 585mm
CHF 545.70*
Content:
1
4 Available. Delivery time: 1-2 workdays
29 Available. Delivery time: 5-7 workdays
Product number:
9148101
Manufacturer:
LLG Labware
Weight:
16.5 kg
* Specifications refer to the packaging unit
Made of CNS 18/10, material no. 1.4301, with micro-polished surface. All shelves are produced with an all round raised profile edge. This prevents anything from slipping over the edge. The shelves are welded to the car. The load capacity per shelf is 80 kg. A noise-insulation mat is mounted on the bottom side of each shelf. The round tubes at the front edges are used as handgrips.
The trolleys are equipped with galvanized steel castors (4 swivel castors, 2 with brakes, castor diam. 125mm) which are inserted in the tubular frame. Wall bumpers made of plastic (polyamide) on all four corners protect against damage.
The trolleys are equipped with galvanized steel castors (4 swivel castors, 2 with brakes, castor diam. 125mm) which are inserted in the tubular frame. Wall bumpers made of plastic (polyamide) on all four corners protect against damage.
Depth mm: | 600 |
---|---|
Description: | 2 shelves, vertical spacing 585mm |
Height mm: | 950 |
Width mm: | 900 |