Label tapes for label printer M510, vinyl B-595
Product number:
4701742
Manufacturer:
Brady GmbH
Packaging information:
Description
Label cassettes for general laboratory labelling purposes. With permanent acrylic adhesive for strong bonding to rough, highly textured, dirty and smooth surfaces, especially at low temperatures. Resistant to prolonged contact with UV light, chemicals, grease and oil, salt spray, cleaning agents and grime. Weather-resistant labels designed to last up to 10 years in outdoor environments.
Certification: RoHS-compliant according to 2011/65/EU (Pass 2015/863)
Certification: RoHS-compliant according to 2011/65/EU (Pass 2015/863)
Properties
| Colour: | Black on yellow |
|---|---|
| Length: | 7.62 m |
| Manufacturer Article Number: | 170844 |
| Material: | Vinyl |
| Type: | M4C-375-595-YL-BK |
| Width: | 9.53 mm |
Skip product gallery
Indicator Tape, Comply™
From
CHF 13.30*
Label tape for hand-held label printer M210/M210-LAB
From
CHF 39.60*
Adhesive label tape Write-on™, writable
From
CHF 29.40*
Deep freeze labels TOUGH-SPOTS®
From
CHF 60.20*
Label remover SOLVENT 50 / SOLVENT 50 SUPER
From
CHF 16.20*
LLG-Labelling tapes, sets
From
CHF 110.00*
Adhesive labels
From
CHF 17.50*
Similar products
Comply indicator tapes are process indicators and the ideal solution for securely sealing a wide variety of sheet packaging. For sterilisation with steam, hydrogen peroxide (H2O2) or hot air.Clear colour change visibleEasily readable resultDirect labelling possibleNo ink transfer to adhesive or other packagingStretchable, reduces the risk of tearingLatex freeSolvent freeLead-free
Brady laboratory labels are designed to withstand extreme laboratory environments. The labels are rersistent against high/low temperatures, solvents and chemicals (Alcohol and DMSO).
Specially coated plastic tape with adhesive backing. Makes labels of any length. Can be used with any pens. Excellent adhesion to glass, metal, PE, etc. Resistant to humidity, as well as acids and alkali solutions in weak concentrations. Leaves no residue when removed.
Pre-cut Peel-off round lables for 0.5 and 1.5/2.0ml microcentrifuge tube tops. Temperature resistant from -196 °C to 80 °C. Easy to write on: PVC labels accept writing from most lab markers. Convenient: Dispensing box assists in labeling individual tubes used in small experiments.
SOLVENT 50 is a highly effective label solvent for the effortless removal of self-adhesive labels on the basis of natural orange terpenes. It works on the adhesive and quickly and gently dissolves adhesive labels on glass, porcelain, metal, wood, foil and cardboard. SOLVENT 50 also removes sticky residue of any kind, such as tar spots or glue residue from stickers. Check compatibility when using on plastics. Not suitable for polystyrene.SOLVENT 50 SUPER is the label remover with brush. The optimised formula has high dissolving capacity to remove paper labels and all kinds of adhesive residues.
For labelling and colour coding of laboratory vessels and utensils. Strong and durable. Water resistant. Can withstand temperatures ranging from -23 °C to 121 °C. The tapes are easy to write-on and leave no residue when removed. Rolls of 12.7 m with an inner diameter of 25 mm.
Manufactured from polypropylene flexible paper with acrylic resin adhesive back. This unique combination does not expand and retract together with temperature fluctuations and therefore always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -96 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue.