Laboratory pH meter Knick 765 | Type: Laboratory pH meter 765 SET
Knick Elektronische
CHF 2,700.00*
Content:
1
Delivery according to order confirmation
Product number:
9774476
Manufacturer:
Knick Elektronische
Length:
368 mm
Width:
306 mm
Height:
337 mm
Weight:
3.98 kg
* Specifications refer to the packaging unit
With many safety features making pH measurement easier and more reliable.
Fullcheck® automatically checks instrument function from input socket to recorder output. Functional efficiency of the instrument can be documented as part of quality management in accordance with DIN EN ISO 9000 using a test print. Drycheck® monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Sensoface® monitors the electrode performance and gives information on electrode condition, evaluating zero point, transductance, response time, electrode impedance and calibration intervals.
Trueline® delivers a calibrated analog recorder signal (electrically isolated). Calimatic® automatically recognises the correct buffer. EMC design protects instrument from electromagnetic interference. The 765 laboratory pH meter complies fully with NAMUR (German committee for measurement and control standards in the chemical industry) EMC recommendations.
Temperature compensation is either automatic with a Pt 100 or Pt 1000 sensor or manual. Data can be processed immediately by a computer via standard RS 232 interface. Direct output to a printer is also possible. Large, bright LED display enables simultaneous readout of 2 measured values, such as pH value and temperature.
Case made of glass reinforced PA, with non-rusting, stainless steel, IP 54 protection level cover, ready for connection of ZU 6954 electrode stand.
Alpahnumerical display, 2 x 4 digits, 14 segment, 13 mm characters, 3 Sensoface status indicators.
Interface:
RS 232 without control lines, galvanically isolated, printer or computer interface.
Printer control:
Via serial interface for ZU 0244 or other standard printers, printing at the touch of a button or via print interval timer 0.1 to 999.9 min.
Electrode monitoring:
Instrument self-test system:
Laboratory pH meter 765, includes mains cable, electrode not included, 3 year guarantee.
Laboratory pH meter 765 SET, with electrode statistics (Opt. 347), pH/Pt 1000 SE 100 combination electrode, ZU 6954 attachment stand and ZU 6928 buffer set (no other optional ancillary equipment available).
Fullcheck® automatically checks instrument function from input socket to recorder output. Functional efficiency of the instrument can be documented as part of quality management in accordance with DIN EN ISO 9000 using a test print. Drycheck® monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Sensoface® monitors the electrode performance and gives information on electrode condition, evaluating zero point, transductance, response time, electrode impedance and calibration intervals.
Trueline® delivers a calibrated analog recorder signal (electrically isolated). Calimatic® automatically recognises the correct buffer. EMC design protects instrument from electromagnetic interference. The 765 laboratory pH meter complies fully with NAMUR (German committee for measurement and control standards in the chemical industry) EMC recommendations.
Temperature compensation is either automatic with a Pt 100 or Pt 1000 sensor or manual. Data can be processed immediately by a computer via standard RS 232 interface. Direct output to a printer is also possible. Large, bright LED display enables simultaneous readout of 2 measured values, such as pH value and temperature.
Case made of glass reinforced PA, with non-rusting, stainless steel, IP 54 protection level cover, ready for connection of ZU 6954 electrode stand.
Alpahnumerical display, 2 x 4 digits, 14 segment, 13 mm characters, 3 Sensoface status indicators.
Interface:
RS 232 without control lines, galvanically isolated, printer or computer interface.
Printer control:
Via serial interface for ZU 0244 or other standard printers, printing at the touch of a button or via print interval timer 0.1 to 999.9 min.
Electrode monitoring:
- Sensoface®:analysis of zero point, transductance, response time and electrode glass impedance, good/average/poor optical display for monitoring electrode condition can be disabled.
- Drycheck®: Monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Calibration timer monitors calibration interval.
Instrument self-test system:
- Fullcheck®: tests all measurement electronics, including analogue output, segment and keyboard test in diagnostic mode, automatic short test after power-on, QM documentation print-outs according to DIN EN ISO 9000 retrievable in diagnostic mode or via interface (printer).
Laboratory pH meter 765, includes mains cable, electrode not included, 3 year guarantee.
Laboratory pH meter 765 SET, with electrode statistics (Opt. 347), pH/Pt 1000 SE 100 combination electrode, ZU 6954 attachment stand and ZU 6928 buffer set (no other optional ancillary equipment available).
| Manufacturer Article Number: | 765-SET |
|---|---|
| Type: | Laboratory pH meter 765 SET |
Similar products
FiveEasy™ and FiveEasy™ Plus benchtop meters provide high quality pH/mV measurements with the simple click of a button.Large, easy to read and easy to understand display with all information visible at a glanceFive self-explanatory buttons making operation simple and easyFast and easy connectivity for simple and secure data transfer (FP only)Electrode arm extension pole includedScope of supply: F20-Meter: Meter with CD operating instructions, QuickGuide, declaration of conformity, test certificate, power supplyF20-Standard: as F20-Meter, plus plastic LE438 3-in-1 pH electrode, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachetsFP20-Meter: Meter with CD operating instructions, QuickGuide, declaration of conformity, test certificate, power supplyFP20-Standard: as FP20-Meter, plus plastic LE438 3-in-1 pH electrode, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachetsFP20-Bio: as FP20-Meter, plus glass LE410 3-in-1 pH electrode, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachetsFP20-Micro: as FP20-Meter, plus glass LE422 micro pH electrode, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachetsFP20-TRIS: as FP20-Meter, plus glass LE420 pH electrode with moveable sleeve diaphragm, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachetsSpecificationsMeasuring range (Accuracy)pH F20 / FP20:0.00 ... 14.00pH / -2.00 ... 16.00pH (±0.01pH)mV:-2000 ... 2000mV (±1mV)Temperature F20 / FP20:0 ... 100°C (0.5°C) / -5 ... 105°C (0.3°C)Input:BNC, Cinch (NTC 30kΩ)Temperature compensation:ATC and MTCPower supply:100 ... 240V / 50 ... 60Hz / 12V DCCalibration F20:3 points, linear, 4 predefined buffer groupsCalibration FP20:5 points, linear/segmented, 4 predefined buffer groupsFP20 onlyMemory:200 measurementsInterface:RS232, USB, Reference input
The LLG-pH Meter 7 is an easy-to-use, robust table-top instrument for measuring pH and redox potential. The large color-touch-display and the intuitive, language-independent user interface ensure fast and easy use. Particularly suitable for routine applications in laboratories, production plants and schools.Available as set with gel combination electrode ("Made in Germany") with temperature sensor Large color-touch-display with language-independent graphical user interfaceAutomatic temperature compensationMemory for 500 values3-point calibrationReminder function for upcoming calibrationsBNC connection for the electrodeRS232 interface for data transferElectrode holder can be mounted left and rightScope of supply:LLG-pH meter 7: pH meter, electrode holder, protective cover, power supply unitLLG-pH Meter 7 set: pH meter, combination electrode, electrode holder, protective cover, power supply unitSpecificationspH range:0 ... 14pH resolution:0.01pH accuracy:±0,01Temperature range electrode:0 ... 80 °CDimensions (W x D x H):180 x 240 x 80 mmWeight:0.7 kgPower supply:9 V DC/1AIP code:IP 54Warranty:3 years
For an easy start, choose one of our ready-to-use kits which includes the pH meter, an application-specific sensor and calibration standards.pH electrode InLab® Expert Pro-ISM with robust PEEK shaft, integrated NTC 30 kΩ temperature sensor and ARGENTAL™ reference system. The electrode is always ready for use as the solid XEROLYT® reference electrolyte does not need to be refilledScope of supply: pH meter SevenDirect™ SD20, electrode arm EasyPlace™, pH electrode InLab® Expert Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
Basic pH/mV laboratory instrument for all tasks where reliable, accurate readings are required quickly and easily. With large LCD segment display and easy-to-read keyboard. The AutoRead function ensures correct and repeatable measurement results. A built-in timer reminds the user of periodical calibration.Scope of supply: Instrument, mains power adapter, standSpecificationsRanges:All values ±1 digitpH:-2.0 ... 20.0 ± 0.1 pH
-2.00 ... 20.00 ± 0.01 pH
-2.000 ... 19.999 ± 0.005 pHmV:± (1200.0 ± 0.3) mV
± (2000 ±1) mVCalibration:1-, 2- or 3 point WTW technical buffer or DIN/NISTTemperature:-5.0 ... 105.0 °C ± 0.1 °CPower supply:Universal power supply 100 to 240 V, 50/60 Hz, 4 x 1.5 V AA or 4 x 1.2 V NiMH rechargeable batteries
Reliable Documentation for pH measurement, if desired also available with built-in printer. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. Up to five calibration points cover almost the complete pH range. A calibration history of the 10 last calibrations allows conclusions on the state of the sensor. An integrated thermal printer (58mm width) is ready for printout of the measured data (option). Supplied with: meter, power supply, stand and USB cable.SpecificationsRanges:All values ±1 digitpH:-2.0 ... 20.0 ±0.1 pH
-2.00 ... 20.00 ±0.01 pH
-2.000 ... 19.999 ±0.005 pHmV:± (1200.0 ±0.3) mV
± (2500 ±1) mVTemperature:-5.0 ... 105.0 °C ±0.1 °CCalibration:1-, 2-, 3-, 4-, 5 point WTW technical. DIN, NIST and 20 additional buffer setsCalibration memory:Up to 10 calibrations recallableDisplay:LCD Graphic, backlitMemory:manual 200/5000 automaticLogger:manual/time controlledInterface:Mini USB-BPower supply:Universal power supply, 100 ... 240V, 50/60 Hz, 4 x 1.5V AA or 4 x 1.2V NiMH