Micro Ball Mill GT300 | Type: Micro Ball Mill GT300
CHF 10,177.00*
Content:
1
Delivery according to order confirmation
Product number:
4669587
Manufacturer:
Beijing Grinder
Weight:
35 kg
* Specifications refer to the packaging unit
For grinding and mixing of hard, medium-hard, soft, elastic and fibrous samples. Also suitable for cell disruption and DNA/RNA extraction. The mill is designed for very short processing times and high sample throughput. The grinding containers carry out horizontal, circular-arc-shaped oscillations and the grinding balls ensure effective grinding and mixing of the sample.
Grinding bowls and balls are not included in the scope of supply and must be ordered separately.
- Only 30 seconds average processing time
- 2 grinding stations for bowls with a volume of 5 to 50 ml
- Multifunctional clamping device, which also holds adapters for reaction vessels
- Grinding time digitally adjustable from 1 second to 100 minutes
- Variable speed from 180 to 1800 min-1
- Control via LCD display
- Programmable grinding parameters, up to 10 programs can be stored
- Transparent cover
- Safety interlock
- Grinding chamber, clamping system and swivel arm made of stainless steel
- Maintenance-free direct drive
- Grinding bowls made of different materials with volumes up to 50 ml available as accessories
Grinding bowls and balls are not included in the scope of supply and must be ordered separately.
| Specifications | |
| Feed size: Sample volume: | |
| Final fineness: Timer: Grinding programs: | |
| Vibration frequency: Number of grinding stations: Performance: | 180 ... 1800 min-1 2 200 W |
| Dimensions (W x D x H): | 380 x 480 x 281 mm |
| Weight: | 34 kg |
| Power supply: | 220 V, 50 Hz |
| Depth mm: | 480 |
|---|---|
| Dimensions (W x D x H) mm: | 380 x 480 x 281 |
| Dual Use: | 0 |
| Feed size mm: | 10 |
| Height mm: | 281 |
| Manufacturer Article Number: | 24.890.0001 |
| Max. fineness mm: | 0.005 |
| Max. speed rpm: | 1800 |
| Min. speed rpm: | 180 |
| No. of grinding stations: | 2 |
| Plug type: | EU |
| Rated capacity kW: | 0.2 |
| Type: | Micro Ball Mill GT300 |
| Type of auxiliary energy: | 220 V, 50 Hz |
| Weight kg: | 34 |
| Width mm: | 380 |
Accessories
Similar products
Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).
Further Ring sieves and rotors available on request.
With screw cap.Simple and safe handlingDust and air-tightSuitable for wet and cryogenic grinding
The HM100 knife mill is used for grinding soft, medium-hard, brittle and fibrous materials. Especially suitable for samples with a high water, oil or fat content. The 2 knives are driven by a 900 W motor to achieve a reliable grinding result. Suitable for applications in agriculture, biology, medicine and food technology.For soft, elastic, fibrous, aqueous, oily or fatty samplesElectronically controlled speedSamples are grinded in only 10 to 30 secondsUp to 700 ml sample volumeAutoclavable grinding vesselsGrinding vessels available in various materialsCutting knives with 2 stainless steel and titanium blades availableEasy operationQuick startCoarse and fine grinding in one stepInterval, reverse and manual mode availableScope of supply: Knife mill, 1 l grinding vessel made of plastic (autoclavable), lid, stainless steel knifeSpecificationsFeed size:
Feed quantity:40 mm
50 ... 700 mlUlt. fineness:300 µmTimer:1 s ... 10 minMotor speed:2000 ... 10000 rpmPower consumption:900 WDimensions (W x D x H):260 x 343 x 454 mmWeight:16 kgPower supply:220 V, 50 Hz
Suitable for disposable and reusable grinding chambers. By using the disposable grinding chambers the possibility of cross-contamination and the effort of cleaning is eliminated. The mills can be used for hard (Mohs hardness up to 5), dry and brittle materials. They are especially suitable for grinding seeds, such as corn and wheat. Increased safety, the operation of the mill is only possible with properly closed grinding chamber and closed lid.Clearly arranged, multilingual OLED-displayUSB interface for control and documentation of all the parametersInterval operation availableStepless adjustable speedAdjustable safety speed and timeProgrammable and storable test conditionsReproducible test resultsTimerEasy operation with touch keypadDust proof sealed housingQuiet operationScope of supply:Tube Mill control: incl. 1 x grinding chamber MT 40 and MMT 40.1 eachTube Mill 100 control: incl. 1 x grinding chamber MT 40, MT 100 and MMT 40.1 eachSpecificationsTube Mill control // Tube Mill 100 controlOperating principle:cutting/impactMotor rating input/output:100 / 80 WSpeed:5000 to 25000 rpmChamber volume:40 ml // 100 mlTimer:
Interval timer:5 s to 3 min
5 s to 60 sOverload protection:yesCircumferential speed:65 m/sMax. feed hardness:5 MohsDimensions (W x D x H):180 x 300 x 170 mm // 180 x 300 x 212 mmWeight:2.7 kg // 2.8 kgIP code:IP 30Power supply:220-240 V, 50/60 Hz