Micro plates Riplate® magnetic | Type: Riplate® 96 SRW magnetic 0,2 ml
CHF 461.20*
Content:
60
Delivery according to order confirmation
Product number:
6272030
Manufacturer:
Ritter GmbH
Weight:
1.967 kg
* Specifications refer to the packaging unit
Riplate® magnetic plates have been specially developed for the reproducible magnetic separation of DNA and proteins and can also be used for cleaning, mixing or centrifugation of samples as well as for the storage and preparation of substances.
For the filtration of proteins as well as for DNA extraction, an automated method called magnetic separation is commonly used. The technology is based on magnetic particles which allow the fast and efficient sample preparation with high throughput. The sustainability of these products as well as reliable analysis results are ensured by the production under cleanroom conditions (class 8). The plates are in line with the SBS standard (Society for Biomolecular Screening) and have been especially developed for the magnetic separation technology.
For the filtration of proteins as well as for DNA extraction, an automated method called magnetic separation is commonly used. The technology is based on magnetic particles which allow the fast and efficient sample preparation with high throughput. The sustainability of these products as well as reliable analysis results are ensured by the production under cleanroom conditions (class 8). The plates are in line with the SBS standard (Society for Biomolecular Screening) and have been especially developed for the magnetic separation technology.
- High resistance towards commonly used chemicals, solvents and alcohols
- High stability also during centrifugation
- Newly developed cylindrical wells enable a good bioturbation of samples
- Slightly raised rims reduce the risk of cross-contamination
- The alphanumeric code allows the registration and identification of individual samples even in confined spaces
| Specifications | |
| Total volume | |
| Riplate® 96 SRW magnetic 0,2 ml: | 0.2 ml/Well |
| Riplate® 96 SRW magnetic 2 ml: | 2 ml/Well |
| Working volume | |
| Riplate® 96 SRW magnetic 0,2 ml: | 0 to 100 µl |
| Riplate® 96 SRW magnetic 2 ml: | 20 to 1000 µl (with knobbed lid) |
| Manufacturer Article Number: | 43001-0506 |
|---|---|
| Type: | Riplate® 96 SRW magnetic 0,2 ml |
Similar products
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer. The test kit contains the I-Blue Lysis Buffer, an optional colour indicator. The use of this indicator prevents common handling errors that impair efficient cell lysis and neutralization.Fast extraction timeHigh yieldPrevention of handling errors during cell lysis and neutralisation by I-Blue colour indicatorSpecificationsI-Blue Mini Plasmid Kit // I-Blue Midi Plasmid KitMethod:Spin column // Anion-ExchangeSample size:1 - 7 ml // 50 - 100 ml high-copy plasmid / 100 - 150 ml low-copy plasmidBinding capacity:50 µg // 500 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:up to 50 µg // 200 - 500 µgOperation Time:15 min. // 80 min.
The test kit was developed to obtain or concentrate DNA fragments from agarose gels, PCR or other enzymatic processes.The agarose gel is dissolved, the enzymes are denatured and the DNA fragments will bind to the glass fibre matrix in the spin column. Wash buffers (containing ethanol) are used to remove contaminants and a low salt elution buffer is used to recover the purified DNA fragments. Recoveries are 90 - 95 % for PCR clean-up. With this kit, PCR purification and gel extraction procedures can be performed, so that a second test kit is not necessary.High recovery rateShort process timeOne test kit for two methodsSpecificationsSample size:up to 300 mg of agarose gel / up to 100 µl of PCR productBinding capacity:10 µg DNAFragment size:10 kbTypical yield:80-90% gel extraction / 90-95% PCR clean-upOperation Time:20 min.
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.SpecificationsMini Kit // Midi KitMethod:Spin column // Anion-ExchangeSample size:1 - 5 ml // 50 ml high-copy plasmid / 100 ml low-copy plasmidBinding capacity:30 µg // 800 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:10- 30 µg // 200 - 800 µgOperation Time:15 min. // 120 min.
Spin column system consisting of filter tubes with glass fibre filter and collection tubes. For the use of leftover reagents from IBI I-Blue MINI Plasmidpurification-Kits (IB47170, IB47171, IB47172), Gel / PCR / DNA Fragment Extraction Kits (IB47010, IB47020, IB47030), Plasmidpurification-Kits High-Speed MINI (IB47101, IB47102) or similar products from other suppliers using a binding, washing and elution method. Sample size, binding capacity and elution volume listed in the specifications must be observed.SpecificationsGel Fragment Extraction Kit // Plasmidpurification-KitsSample size:300 mg agarose gel / 100 µl PCR product // 1 - 4 ml bacterial cultureBinding capacity:up to 10 µg // up to 30 µgElution volume:20 - 50 µl // 50 - 100 µl
For rapid and efficient extraction of plasmid DNA from bacterial cells. The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.Fast extraction timeHigh yieldStandard version or endotoxin-free version (
The test kit was designed specifically for purification of viral DNA/RNA from cell-free samples such as serum, plasma, body fluids, and the supernatant of viral infected cell cultures. The DNA/RNA from the viruses is lysed quickly, the enzymes are denatured and the DNA fragments will bind to the glass fibre matrix in the spin column. Contaminants such as salts, metabolites, and soluble macromolecular cellular components are removed in the wash process. The nucleic acids are eluted in RNase-free water and are then ready for use in subsequent reactions including Real-Time PCR, automated fluorescent DNA Sequencing, PCR, and other enzymatic reactions.Fast extraction timeQuality tested on a lot-to-lot basisSpecificationsMethod:Spin columnSample size:200 µlElution Volume:50 µlOperation Time:40 min.
Each spin column contains 2 filters and is either recommended for purification of DNA (GF-F2) or RNA (GF-N2). The system consisting of 0.8 ml filter tube and 1.5 ml or 2.0 ml receiver tube.Recommended for purificationPrefiltering of dirty solutionsRapid flow rateHigh particle loading capacity