Multifunctional oil 5-56 + PTFE | Capacity ml: 500
Product number:
6312049
Manufacturer:
CRC Industries Deutschland
Weight:
0.528 kg
* Specifications refer to the packaging unit
Multifunctional oil with PTFE for lubrication, loosening, cleaning and protection. Ensures permanent wear protection, high pressure absorption capacity and reliable lubrication even under extreme conditions. Allows either surface spraying or spot-precise spraying.
- High quality mechanic oil
- Silicone-free
- Temperature range: -50 to 150 ° C
| Hazardous Substance Data | |
| GHS | |
| Signal word | Achtung |
| H-Satz | H223, H229 |
| UNNR | 1950 |
| SDS | Link |
| Capacity ml: | 500 |
|---|
Similar products
Evapo-Rust® removes rust safely and effectively without scrubbing or sanding. Simply immerse the rusted object into the rust remover.Water-solublepH-neutralEasily biodegradable (68.9 %) according to OECD 301BReusable with long-lasting effectivenessNo fumes or bad odoursNon-toxic, non-caustic and non-corrosiveDoes not affect plastic, PVC, Viton and non-oxidized lacquers
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Multifunctional oil for food technology. The high-purity oil is registered for food technology in the highest NSF category H1 and can even be used if food contact cannot be excluded completely. MULTI OIL is colorless, odorless, silicone-free and temperature-resistant up to 150 ° C.lubricates, solves and protectsuniversally applicable in food technology
A high-quality, silicone-based, viscous, insulating oil, prevents spark discharge, stops leakage current and eliminates corona effect. It is water-repellent and therefore very effective as a moisture protector with excellent dielectric properties. Can be used at temperatures from -50°C to +200°C.
Instant cooling of parts. Cooling agent for thermal fault location. Provides an instant solution by cooling down circuitry to -50°C. Intermittent short circuits or interruptions in condensors, resistors, integrated circuits are quickly discovered. Especially designed for applications where 100 % safety is an absolute must. The fluid evaporates very quickly and, in doing so, extracts heat of vaporisation from the environment. As a result, the sprayed surface cools down considerably (max. - 55°C). The spray evaporates completely and leaves no residues. It does not contain CFC's.