NMR tubes, length 100 mm, for Bruker MATCH™ system
CHF 41.30*
Content:
10
Delivery according to order confirmation
Product number:
6281694
Manufacturer:
Hilgenberg GmbH
Packaging information:
Length:
111 mm
Width:
18 mm
Height:
2 mm
Weight:
0.021 kg
Description
These NMR tubes were developed with the special length of exactly 100 mm and are thus specifically adjusted for the Bruker MATCH™ system.
Properties
| Ext. Ø: | 5.0 mm |
|---|---|
| Ext. Ø: | 5.0 mm ± 0.025 |
| Int. Ø: | 4.20 mm |
| Int. Ø: | 4.20 mm ± 0.025 |
| Length: | 100 mm |
| Manufacturer Article Number: | 2001726 |
| Tolerance ext. Ø: | 0.025 mm |
| Tolerance int. Ø: | 0.025 mm |
| Wall thickness: | 0.40 mm |
Skip product gallery
NMR tubes, 5 mm, DURAN®, Economic
From
CHF 3.80*
NMR tubes, diameter 3 and 5 mm borosilicate glass 3.3, standard
From
CHF 130.35*
NMR Tubes, 5 mm, Wilmad, Precision
From
CHF 98.40*
NMR Tubes, diameter 5 mm, borosilicate glass 3.3, High Precision
From
CHF 66.70*
EPR sample tubes, quartz glass
From
CHF 325.00*
Similar products
NMR tubes are available, according to requirement, in three accuracy classes. The correct tube can be selected depending on magnetic field and spin. The tubes are noteworthy for their close tolerances and accuracy, especially to their straightness, wall thickness and wall thickness distribution. Consequently, quick and accurate test results are achievable. With retrace code.The disposable for economical use in fully automatic sample dispensers or where high throughputs are involved.
The NMR tubes are produced with high precision. They are suitable for routine measurements, high-throughput measurements or NMR systems with autosampler at measurement frequencies up to 600 MHz. The tubes are manufactured from borosilicate glass 3.3 which is conform to USP Type I and ASTM E438, Type I, Class A. Please order closing caps separately.
Thin-walled Precision NMR tubes. To maximize Signal-Noise-Ratio, Precision NMR tubes have minimal paramagnetic impurities that would impact shimming. For experiments requiring critical shimming quality (high/ultrahigh field, nonspinning, multi-dimensional, multi-nuclei, DNP experiments and studies involving biological samples).Made from borosilicate glass, ASTM E438 Type 1 Class AHydrolytic class 1Inner surface is resistant to strong acid and base at ambient temperatureFor temperatures up to 230 °C and within a temperature step of 120 °CInclude disposable caps
The High Precision NMR tubes are manufactured with high accuracy and excellent straightness and concentricity. They are particularly suitable for quantitative measurements and measurements in spectrometers with high measurement frequencies above 600 MHz up to the highest available field strengths above 1 GHz. The tubes are made of borosilicate glass 3.3, which complies with USP Type I and ASTM E438, Type I, Class A requirements. NMR tubes are supplied without caps, please order caps separately.
These EPR tubes are manufactured from upmarket quartz glass with only slightest amounts of paramagnetic trace elements. The tubes are delivered single packed and sealed in plastic foil.