Ovens TR 60 - TR 1050 up to 300 °C
CHF 20,100.00*
Content:
1
Delivery according to order confirmation
Product number:
4660522
Manufacturer:
Nabertherm GmbH
Packaging information:
Description
With their maximum working temperature of 300 °C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.
Option:
- Models TR 60 to TR 240 designed as tabletop models
- Models TR 420 and TR 1050 designed as floor standing models
- Horizontal, forced air circulation results in temperature uniformity better than ±5 °C
- Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean
- Large handle to open and close the door
- Charging in multiple layers possible using removeable trays (number of removeable trays included, see table below)
- Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420
- Double swing door with quick release for TR 1050
- TR 1050 equipped with transport castors
- PID microprocessor control with self-diagnostic system
- Infinitely adjustable exhaust at the rear wall with operation from the front
- Available controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)
- Solid state relays provide for low noise operation
- 220-240 V 1/N/PE 50/60 Hz connector as standard
Option:
- Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Infinitely adjustable fan speed of the air-circulation
- Window for observing charge
- Further removeable grids with rails
- Side inlet
- Stainless steel collecting pan to protect the furnace chamber
- Door hinges on the left side
- Reinforced bottom plate
- Safety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °C
- Transport castors for model TR 450
- Upgrading available to meet the quality requirements of AMS 2750 E or FDA
- Process control and documentation via VCD software package for monitoring, documentation and control
Properties
| Depth int.: | 550 mm |
|---|---|
| Ext. depth: | 780 mm |
| Ext. height: | 1470 mm |
| Ext. width: | 1000 mm |
| External dimensions (WxDxH): | 1,000 x 780 x 1,470 mm |
| Height int.: | 1100 mm |
| Int. width: | 750 mm |
| Internal dimensions (WxDxH): | 750 x 550 x 1,100 mm |
| Manufacturer Article Number: | TR-455ON |
| Material interior: | Stainless steel 1.4301 |
| Max. no. of inserts: | 15 |
| Max. temperature: | 300 °C |
| Min. temperature: | +20 °C |
| Nominal capacity: | 450 l |
| Plug type: | EU |
| Rated capacity: | 6 kW |
| Temperature: | RT+20 ... 300 °C |
| Temperature addition: | RT |
| Type: | TR 450/C550 |
| Type of auxiliary energy: | Mains connection |
| UNSPSC: | 41104510 |
| Weight: | 235 kg |
Skip product gallery
Drying and heating chambers FD Avantgarde.Line
From
CHF 2,351.00*
Drying and heating chambers FED Avantgarde.Line
From
CHF 3,192.00*
Shelves for BINDER chambers and incubators, stainless steel
From
CHF 86.00*
Universal drying oven LLG-uniOVEN 42 and LLG-uniOVEN 110
From
CHF 1,799.30*
Universal ovens UFplus
From
CHF 2,738.00*
Drying and heating chambers ED Avantgarde.Line
From
CHF 1,774.00*
Drying oven E28 series
From
CHF 1,368.00*
Drying and heating chambers FD-S Solid.Line
From
CHF 1,882.00*
Similar products
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display and enhanced timer functionsAdjustable fan speedEthernet interface
Shelves made of stainless steel, perforated.If you are ordering replacement shelves, please provide the serial number prior to ordering, since it might be necessary to order other shelves with different dimensions.
Microprocessor controlled universal drying oven with forced convection including two shelves. Each shelf of the uniOVEN 42 and uniOVEN 110 has a load capacity of 20 kg, the total load capacity of each unit is 50 kg. The maximum number of shelves is 7 for uniOVEN 42 and 10 for uniOVEN 110 with a distance of 40 mm between shelves.Quick and intuitive operationMicroprocessor control with integrated auto-diagnostic systemForced convection with fanDigital display for time and temperatureTimer: 1 minute to 99.9 h and continuousDelayed start timer: 1 minute to 99.9 hOutlet for vapour exhaustionAcoustical and visible information for end of programAcoustical and optical alarm at temperature differencesInterior made of stainless steelAdjustable over temperature protection at 300 °CTemperature accuracy: ±1 °C (at 70 °C)Temperature uniformity: ±2 °C (at 70 °C)Scope of supply: LLG-uniOVEN incl. 2 shelves
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Forced air circulationTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convectionController with LCD display
Robust, space-saving, low-profile ovens with mechanical and adjustable chamber ventilation.Uniform drying conditions thanks to APT.line™ technologyIdentical test conditions throughout the chamber interior independent of sample size and quantityOutstanding thermal insulationHydraulic thermostat temperature controlAdjustable exhaust air flapTimer 0 to 120 min2 chrome-plated racks
Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.Easy handlingAccurate temperature controlSimple and ergonomic door openingAPT.line™ preheating chamber technologyAdjustable exhaust air flapController with timer functionClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convection for homogenous temperature distribution.