Oxygen Depletion Safety Monitor, O2Ne+™ | Type: O2Ne+™
CHF 1,560.00*
Content:
1
Delivery according to order confirmation
Product number:
6284255
Manufacturer:
Analox Sensor Technology Ltd.
Length:
247 mm
Width:
193 mm
Height:
130 mm
Weight:
1.408 kg
* Specifications refer to the packaging unit
The widespread use of N2, LN2, He or Ar in laboratories poses a potential asphyxiation hazard to personnel. If an inert gas leaks or builds up in a confined area it can deplete the O2 to dangerously low levels. The use of enriched O2in laboratories poses both a fire risk and hyperoxia risk to personnel if it were to leak or build up in a confined area.
The O2NE+ and Safe-Ox+ from Analox Sensor Tecnhology are an affordable, low maintenance, long life solution to assist in mitigating the risk of using these gases in your laboratory.
The O2NE+™ is a simple to use, wall mounted oxygen depletion monitor which has 2 audible/visual alarms which will trigger at 19.5% and 18% O2 which means that lab personnel can take evasive action in the event of a gas leak.
Delivery Includes: Main O2 sensor unit with relay on 2nd alarm (18%) and 1 alarm repeater to be placed at the entrance, with mains power supply
The O2NE+ and Safe-Ox+ from Analox Sensor Tecnhology are an affordable, low maintenance, long life solution to assist in mitigating the risk of using these gases in your laboratory.
- Long life, low drift sensor lasts up to 7 years
- Minimum calibration check required - only every 12 months (user maintainable)
- Simple to read "OK", "Alarm" and "Fault" indication
- Easy installation and maintenance can be conducted by the user
- Additional (quick connect) alarm repeaters available if more than one entrance to the laboratory
- Assists in compliance with Exposure Limit regulations such as EH40
- Supplied with relays which can be used to trigger ventilation or building management systems etc
Delivery Includes: Main O2 sensor unit with relay on 2nd alarm (18%) and 1 alarm repeater to be placed at the entrance, with mains power supply
| Specifications: | |
| Range : | 0.1 to 25 % O2 |
| Sensor Accuracy : | +/- 0.75 % O2 (5.0 to 25.0 %) |
| Alarm intensity : | 85 dbA |
| Monitor display : | 4 digit LCD |
| Operating Temperature : | 0 to 40 °C |
| Monitor Dimensions : | 175 x 110 x 75 mm |
| Alarm Repeater Dimensions : | 72 x 170 x 45 mm |
| IP Rating : | IP65 (IP43 alarm repeater) |
| Warranty : | 2 years electronics (1 year sensor) |
| Connector: | EU |
|---|---|
| Type: | O2Ne+™ |
Similar products
In many fields, such as mining or industry, it is very important to detect even the smallest air flows, in order to quickly and reliably evaluate the possible diffusion of dangerous substances. With the air flow test tubes, the source, direction and speed of the air flow are visible immediately.
The Dräger-Tubes® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.
Made of DURAN® tubing. Available with or without nozzle (with thread GL and septa), with two one-way stopcocks NS14 (with retaining device), connections: capillary tube (outer dia. 8mm, inner dia. 2.7mm), glass olive (outer dia. 8mm), with inscription label. Also available with PUR coating.* Body length (mm)
Fast measurement with one hand: The Dräger-Tube pump accuro® allows you to use the established Dräger-Tubes® to take measurements under extreme conditions. The easy-to-use Dräger-Tubes have already been calibrated and form a perfect unit with the Dräger-Tube pump.Gas pump Dräger accuro® set consisting of:Dräger-Tubes® pump accuro®, ready bag, with tube opener and spare part set
The Dräger-Tubes® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.
The Dräger Aerotest Alpha allows the quality of breathing air supplied by a compressor or compressed gas cylinder to be determined. Use of the test system performs a reliable check in accordance with the breathing air standard EN 12 021.Dräger Aerotest Alphacomprising of 1 pressure reducer, measuring device for 4 tubes, impactor adapter, coupling, barbed nipple, stopwatch, tube opener Dräger TO 7000, bubble test hose, pack of 5 sintered filters, instruction for use, transport case (black)Dräger Aerotest Alpha, with Dräger Tubes :Dräger Aerotest Alpha+ box of 10 Dräger Oil Impactors,+ box of 10 Dräger-Tubes carbon dioxide (CO2) 100/a-P,+ box of 10 Dräger-Tubes carbon monoxide (CO) 5/a-P,+ box of 10 Dräger-Tubes water vapor (H2O) 20/a-PSpecificationsDimensions of carrying case (L x W x H)350 x 300 x 85 mmWeight, including contentsapprox. 3.0 kgMax. supply pressure
Supply pressure (set on delivery)15 bar
3.0 barPressure gauge0.3 to 15 barConnection for compressed air supplybarbed nipple 9 mmFlow rate0.2 and 4.0 l/min
Using the Dräger activated charcoal tubes or silica gel tubes, hazardous substances in the air are collected using a suitable medium via adsorption or chemisorption. The sample is then analysed in the laboratory by means of various analytical methods such as gas chromatography (GC), high performance liquid chromatography (HPLC), UV-VIS photometry, or IR spectroscopy.
According to ISO 9002.DOT39 and EN12205.Control valve not included, please order separately.
Transparent. With 1- or 3-way stopcocks, PP, with free-turning Teflon® plugs.SpecificationsCapacity:250 mlTube length:222 mmTube diameter:51 mmMaximum pressure:15 psiFor tubing with an internal diameter:6.4 .. 9.5 mmStopcocks:64 mm