PF - laboratory-flange triple clamp, 18/10 stainless steel
CHF 2,330.00*
Content:
1
Delivery according to order confirmation
Product number:
9224852
Manufacturer:
BOCHEM Instrumente GmbH
Packaging information:
Weight:
1.83 kg
Description
Holder for all PF- laboratory flasks for the alternating removal of vessel and lid. This special quick-release fastener ensures that the two laboratory flat flanges of reaction tube and flat flange lid are connected and, in addition, that the reaction tube and flat flange lid are held individually (optimal flange angle 45°). Without accessories.
Properties
| Clamping range: | 120 mm |
|---|---|
| Manufacturer Article Number: | 17022 |
| Material: | Stainless steel 1.4301 |
| Max. clamping width: | 120 mm |
| Shaft Ø: | 15 mm |
Skip product gallery
Clamps with stand rod
From
CHF 745.00*
Reaction flasks, flat flange, DURAN®, cylindrical
From
CHF 58.20*
Reaction flasks, flat flange, DURAN®, flask shaped
From
CHF 253.00*
Flat flange beakers, DURAN®
From
CHF 180.00*
Flat flange lids, PTFE, DN 150, Typ 1
From
CHF 521.23*
Flat flange lids, PTFE, DN 150, Typ 2
From
CHF 521.23*
Similar products
For fixing lids onto reaction vessels and mounting on a stand,Material: polyester-glass compound (clamp), steel (rod)
Flanged neck with groove for vacuum use. Capacities indicated are brim-full volumes. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Flanged neck with groove for vacuum use. Capacities indicated are brim-full volumes. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Flanged neck with groove for vacuum use. Maximum 0.5bar working pressure at 250°C. Capacities indicated are brim-full volumes. We recommend that these beakers are heated in water or oil baths. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
The flat flange allows the lid to be securely attached to the reactor body and ensures a reliable seal to prevent leakage. Compatible according to DIN 12214.1 x NPT 1/2" female thread (centered)2 x NPT 1/2" female thread (directly to the center)1 x NPT 1/2" female thread (aside to the center)1 x NPT 1/4" female thread (aside to the center)1 x NPT 1/4" female thread (vertical)
The flat flange allows the lid to be securely attached to the reactor body and ensures a reliable seal to prevent leakage. Compatible according to DIN 12214.1 x NPT 1/2" female thread (centered)2 x NPT 1/2" female thread (directly to the center)1 x NPT 1/2" female thread (aside to the center)1 x NPT 3/4" female thread (aside to the center)1 x NPT 1/4" female thread (vertical)