Sample bags Whirl-Pak®Stand-Up, PE, sterile, free standing | Nominal capacity: 2041 ml
CHF 243.10*
Content:
250
Delivery according to order confirmation
Product number:
6260543
Manufacturer:
Nasco Sampling LLC
Length:
464 mm
Width:
310 mm
Height:
358 mm
Weight:
3.5 kg
* Specifications refer to the packaging unit
Easy sample handling due to the specially gusseted bottom which flattens out when the sample is placed inside, allowing the bag to stand up on its own. It works just like a bottle or beaker, however it cost less, is shatterproof and uses a fraction of the storage space. The integrated wire closing system ensures the tightness of the sample bag. With write-on label for clean and easy identification. Temperature range: -210 to 82 °C.
| Dimensions (WxH): | 190 x 380 mm |
|---|---|
| Height: | 380 mm |
| Material: | PE |
| Max. temperature resistance: | 82 °C |
| Min. temperature resistance: | -210 °C |
| Nominal capacity: | 2041 ml |
| Sterile: | Yes |
| Temperature resistance: | -210 ... 82 °C |
| Thickness: | 0.102 mm |
| Width: | 190 mm |
| With labelling field: | Yes |
Similar products
Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications. Available with or without write-on label. With integrated wire closing system. Temperature range: -210 to 82 °C.
Transparent. For samples from chemistry, pharmaceutical, food technology applications etc.Sterile, RNase, DNase and pyrogen-freeLeakproofType A: Without write-on panelType B: With write-on panel.
Sterile, solid bags for the homogenisation of liquids and solidsWith and without labelling strips
Easy sample handling due to the specially gusseted bottom which flattens out when the sample is placed inside, allowing the bag to stand up on its own. It works just like a bottle or beaker, however it cost less, is shatterproof and uses a fraction of the storage space. The integrated wire closing system ensures the tightness of the sample bag. With write-on label for clean and easy identification. Temperature range: -210 to 82 °C.
Stand-up bag with bottom gussetAluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)Very good barrier properties against water vapor and oxygenOpaqueProtection against the influence of UV radiationTemperature range: -40 °C ... 90 °C
Flat bag with open bottom, sealableAluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)Opaque2 bags of 50 pieces
All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
Transparent. For samples from chemistry, pharmaceutical, food technology applications etc. SteriBag StandUp stable and able to stand on its own without a separate stand or support, leaving both your hands free to take the sample and fill the bag.Sterile, RNase, DNase and pyrogen-freeLeakproof
All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.Temperature range -210 to 82 °C.Made of black pigmented PE-film providing maximum protection for samples that are sensitive to light.