Support ring
Product number:
9225110
Manufacturer:
Carl Friedrich Usbeck KG
Packaging information:
Length:
232 mm
Width:
96 mm
Height:
25 mm
Weight:
0.222 kg
Description
Steel. With or without bosshead, as indicated.
Properties
| Ext. Ø: | 100 mm |
|---|---|
| Int. Ø: | 84 mm |
| Manufacturer Article Number: | 2921 |
| Material: | Steel |
| Type of coating: | Zinc-plated |
| With bosshead: | Yes |
Skip product gallery
From
CHF 158.00*
From
CHF 13.40*
From
CHF 16.30*
Other customers also bought
BOCHEM Instrumente GmbH
BOCHEM Instrumente GmbH
Retort stand bases 18/10 stainless steel
To DIN 12892. With an M10 threaded hole in the middle of one short side. Width heavy feet for added stability, an adjustable foot and non-slip rubber coating.
Carl Friedrich Usbeck KG
Carl Friedrich Usbeck KG
Retort stand bases
To DIN 12892. Steel, powder-coated, 8 mm thick. Rubber feet. With an M10 bore hole in the middle of one shorter side.
BOCHEM Instrumente GmbH
BOCHEM Instrumente GmbH
Support rings
18/10 Stainless or zincked. With or without bosshead.
Skip product gallery
Bosshead
From
CHF 13.90*
Burette holders
From
CHF 37.20*
Bossheads, zinc die casting, with brass screws
From
CHF 5.80*
Cross bosshead, cast steel
From
CHF 15.70*
Table clamps for rods, malleable cast iron, coated
From
CHF 85.90*
Bossheads, Zinc die casting, with steel screws
From
CHF 5.15*
Rectangular retort stand bases, enamel, coated steel plate
From
CHF 40.40*
Similar products
Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.
Aluminium, powder-coated. With roller grips and bosshead for retort stand rods.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.
For table tops with a thickness of max. 55mm. Rod diameter 12/13mm.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".