Syringe pump Legato 130

Accuracy:	±0.5 %
Accuracy:	0.5 %
Depth:	178 mm
Dimensions (WxDxH):	226 x 178 x 932 mm
Height:	932 mm
Manufacturer Article Number:	788130
Max. capacity:	1000 µl
Max. flow rate:	3.82 ml/min
Max. voltage:	240 V
Min. capacity:	0.5 µl
Min. flow rate:	3.66 pl/min
Min. voltage:	100 V
No. of syringes:	1
Power supply:	100 ... 240 V, 50/60 Hz
Power supply frequency:	50/60 Hz
Type:	Legato®130
Type of auxiliary energy:	Mains connection
UNSPSC:	41105104
Weight:	2 kg
Width:	226 mm

Syringe Pump Legato® 100

The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsSingle Syringe Infusion Pump. This pump is ideal for applications where a single syringe is used.

From CHF 2,637.00*

Syringe Pumps Legacy®

Economical Single-Syringe Infusion Pump combining precision flow with outstanding ease-of-use and exceptional durability.For single syringes from 10 µl to 60 ml, any manufacturerSimple menu-driven setup (select syringe size from displayed table, set dispense volume and flow rate)Easy to read bright, backlight displayDispense volume displayed and has automatic shutoff at completionVolume and flow rate units (µl/h or ml/h) are selected automatically based on syringe sizeLast settings stored in permanent memoryButton release of drive nut for easy syringe installationChoice of run/stop after a power interruption

From CHF 2,070.00*

Syringe Pump Legato® 101

The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Nanoliter Pump. This infusion only pump is ideal for applications where dual syringes are required with small volumes under 10 ml.

From CHF 3,117.00*

Syringe Pump Legato® 270P

The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Push/Pull Syringe Pump. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes. Features additional user defined configurations/programs of up to 800 steps. Up to 40 programs of 20 steps each step can be stored in memory.

From CHF 9,683.00*

Single Syringe Dispenser with Premium Controller Microlab® 700 Series

Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output

From CHF 16,257.50*

Dual Syringe Continuous Dispenser with Advanced Controller Microlab® 700 Series

Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output

From CHF 16,362.10*

Dual Syringe Continuous Dispenser with Premium Controller Microlab® 700 Series

Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output

From CHF 18,815.80*

Accessories for Microlab® 700 Series

From CHF 10.00*

Syringe Pumps Legacy®

The simple and easy to use Legacy® pumps are a high value solution for delivering precise and smooth flow in research and production applications. The KDS 100 pump gives customers the most cost effective solution for infusing fluids. Alternatively, the KDS 200 gives advanced features with RS232 and TTL interfaces and can be daisy chained together to create a pumping network. KDS 220 holds up to 10 syringes.Vibration Elimination SystemFlow Direction IndicatorFast Forward/ReversePower Recovery DiagnosticsSyringe LibraryFlow Rate SelectionVolume Dispense ModeDirect Entry Syringe DiameterOptional: Foot Pedal Interface, NIST Certificate, AlarmKDS 100 Single-Syringe Infusion Pump: Economical pump combining precision flow with outstanding ease-of-use and exceptional durability.KDS 101 Two-Syringe Nanoliter Pump: For microdialysis and similar applications which require virtually pulseless flow at very low flow rates.KDS 200 Two-Syringe Infusion Pump: Programmable pump for daisy chain connection. Feature-laden and with a broad speed range and a wide range of syringe sizes it meets the requirements of most laboratory applications.KDS 220 Multi-Syringe Infusion Pump: For applications requiring multiple syringes. This pump has been modified to hold up to 10 syringes.* with CE Mark

Price on request

Syringe pump Gemini 88 Plus

This unique Dual Rate Syringe Pump is really two pumps in one, by providing two completely independent pumping channels linked through hardware and software. The dual rate syringe pump can infuse simultaneously at different rates, or infuse with one syringe and withdraw with the other. When combined with a valve box, it provides the continuous delivery of a peristaltic or piston pump with the accuracy, absence of pulsation and low flow rates of a syringe pump. This functionality allows continuous infusion or withdrawal, 24 hours a day, 365 days a year with the accuracy and low flow of every KD Scientific syringe pump. Various applications can benefit from the three operating conditions. All three conditions come with the Gemini 88 Plus. No additional upgrades are required.The Gemini 88 Plus Dual Rate Syringe Pump opens up whole new pumping possibilities. Three operating conditions named Independent, Reciprocating and Twin are available as standard features to satisfy various applications in life science and industrial settings.7'' colour touch screen display allows quick and easy setupTwo separate syringe pumps in one instrumentCompatible with a wide variety of syringesTTL, USB and RS-232 compatibleContinuous fluid deliveryHigh or low pressureContinuous injection for long-term toxicology testingThe injection of dyes, perfumes and flavoring in industrial applicationsApplications with liquids or viscous materials in micro-manufacturingContinuous injections of reactants into reactor vesselsSimultaneous samplings from two sites

From CHF 7,706.00*

Syringe pump Legato® 130