Temperature hoses for highly dynamic temperature control systems PRESTO™, stainless steel 1.4404, triple insulation | Connection: M30 x 1.5
CHF 1,357.00*
Content:
1
Delivery according to order confirmation
Product number:
4684005
Manufacturer:
Julabo GmbH
* Specifications refer to the packaging unit
Temperature hoses with special triple insulation and two connections. The ends are covered with silicone caps for protection.
| Connection: | M30 x 1.5 |
|---|---|
| Length cm: | 200 |
| Outer diam. mm: | 57 |
| Pressure max. bar: | 15 (at 20 °C) / 10 (at 350 °C) |
| Temp. range °C: | -100 ... 350 |
Similar products
Temperature hoses with special triple insulation and two connections. The ends are covered with silicone caps for protection.
With graduationLaboratory flange LFWith grooveTwo connectors with threads GL 14 or GL 18Made of DURAN® tubingOther sizes on request.
Highly dynamic temperature control systems suitable for high-precision, external temperature control tasks, such as reactor temperature control, material tests, or temperature simulation.Space-optimised, compact designShort heating and cooling timesLarge working temperature ranges without changing heat transfer mediaMinimized floor space due to side panels without ventilation slits5.7" TFT touch screenSD card slotInterfaces for USB, Ethernet, RS232, ModbusConnections for alarm output, Pt100 external sensor, and standby-inputICC cascade temperature controlElectronic level indicatorIntegrated programmer for 8 x 60 stepsClass III (FL) acc. to DIN 12876-1With air-cooled refrigerating machineA 38, A 41, and A 70 with natural refrigerants
Forte HT30-M1 and Forte HT60-M2Julabo High Temperature Circulators have a compact, closed design and are ideally suited for wide working temperature ranges.rapid heatinghigh pump capacity, reducible via adaptersmall footprintminimal filling volumecooling water connections for applications at particularly high temperatures (cooling zone in unit)wide working temperature range without changing bath fluidsavoids oxidation and cracking of the bath fluid. This ensures a prolonged lifetime of the bath fluids recommended by Julabocan be easily integrated into a miniplant installationtime-saving filling process for the entire system with permanent air purgeForte HT30-M1 and Forte HT60-M2 with C.U. cooling unitUsing the optional C.U. cooling unit, the working temperature range can be further extended downwards. Additionally a high cooling capacity is available ifconstant tap water cooling is carried out.temperature applications from +40°C with controlled tap water coolingrapid cooling to low temperature valuesdynamic control characteristics: Automatic control of exothermic reactions in the connected system
Highly dynamic temperature control systems suitable for high-precision, external temperature control tasks, such as reactor temperature control, material tests, or temperature simulation.Space-optimised, compact designShort heating and cooling timesLarge working temperature ranges without changing heat transfer mediaMinimized floor space due to side panels without ventilation slits5.7" TFT touch screenSD card slotInterfaces for USB, Ethernet, RS232, ModbusConnections for alarm output, Pt100 external sensor, and standby-inputICC cascade temperature controlElectronic level indicatorIntegrated programmer for 8 x 60 stepsClass III (FL) acc. to DIN 12876-1With water-cooled refrigerating machineW 41, W 93, and W 93x with natural refrigerants