Vacuum pump trolley, CP1 - CP2 | Type: With pressure gauge
CHF 6,375.00*
Content:
1
Delivery according to order confirmation
Product number:
9881380
Manufacturer:
KGW Schieder GmbH
Weight:
34 kg
* Specifications refer to the packaging unit
Vacuum pump trolley with two condensate traps that can be operated alternately or together. The pump trolley consists of an aluminium frame mounted on lockable castors with a lower PE-shelf for a vacuum pump and a PE-top shelf which accommodates two cold traps. The condensate traps can each hold approx. 150ml. Spherical ground joints are sealed with FEP covered O-rings. Supplied without pump.
The standard assembly is designed for use with LN2 as coolant. When using CO2and acetone please order 2 x CO2 grid (Cat. No. 9.032 081).
Note: Price does not include vacuum pump.
The standard assembly is designed for use with LN2 as coolant. When using CO2and acetone please order 2 x CO2 grid (Cat. No. 9.032 081).
Note: Price does not include vacuum pump.
| Type: | With pressure gauge |
|---|
Similar products
Flanged tubing nozzles, aluminium. For Type KF small flange.
The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!
Oil for rotary vane pumps B: Standard pump oil. High viscosity, low vapour pressure, good chemical resistance.Oil for rotary vane pumps K 8: For acid vapours. Strongly hygroscopic, with limited capacity for water vapour. Pump must be factory-adjusted to accept this oil.Perfluorpolyether oil: Synthetic Oil. Certified for pumping pure oxygen.
Small flanges. Stainless steel. With male or female conical ground joints and DN flange as outlined below.
Stainless steel/FPM (e.g. Viton®). For Type KF small flange.
Flanged at both ends. For Type KF small flange. B1 = Minimum radius for one-off bending.B2 = Minimum radius for repeated bending.