Water stills WS-100-4 / WS-200-4-220 | Type: WS-200-4-220
Cole-Parmer Ltd. (Stuart)
CHF 3,140.80*
Content:
1
Delivery according to order confirmation
Product number:
6224028
Manufacturer:
Cole-Parmer Ltd. (Stuart)
Weight:
8 kg
* Specifications refer to the packaging unit
For economic production of high purity distilled water. The devices are eqipped with 2 independent safety thermostats that prevent from overheating in the event of failure of the water supply. With built in acid addition funnel and stopcock for easy descaling without dismantling. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. The condenser design ensures that the droplets of distilled water stay in contact with the cooling coil as long as possible for providing cold distilled water.
- Glass construction
- Automatic switch-off prevents overflow
- Pre-drilled stand for easy wall mounting
- With metal/silica sheated metal heaters
| Specifications | WS-100-4 // WS-200-4-220 |
| pH range: | 5.0…6.5 |
| Conductivity: | 3.0…4.0 µS/cm // 1.0…2.0 µS/cm |
| Resistance: | 0.25…0.3 mΩ/cm // 0.5…1.0 mΩ/cm |
| Water consumption: Output: | approx. 60 l/h 4 l/h |
| Power consumption: Dimensions MERIT (W x T x H): Dimensions DISTINCTION (W x T x H): | 3000 W 500 x 150 x 450 mm 540 x 160 x 410 mm |
| Power supply: | 220-240 V, 50-60 Hz |
| Type: | WS-200-4-220 |
|---|
Similar products
Deionized and UV irradiated. Acc to DIN 43530 / EN 385. In plastic canister.SpecificationspH value:
Conductivity:7,0
5 µS/cmHardness:0,02 mmol/lChlorine content:2 mg/l
For economic production of high purity distilled water. The devices are eqipped with 2 independent safety thermostats that prevent from overheating in the event of failure of the water supply. With built in acid addition funnel and stopcock for easy descaling without dismantling. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. The condenser design ensures that the droplets of distilled water stay in contact with the cooling coil as long as possible for providing cold distilled water.Glass constructionAutomatic switch-off prevents overflowPre-drilled stand for easy wall mountingWith metal/silica sheated metal heatersSpecificationsWS-100-4 // WS-200-4-220pH range:5.0…6.5Conductivity:3.0…4.0 µS/cm // 1.0…2.0 µS/cmResistance:0.25…0.3 mΩ/cm // 0.5…1.0 mΩ/cmWater consumption:
Output:approx. 60 l/h
4 l/hPower consumption:
Dimensions MERIT (W x T x H):
Dimensions DISTINCTION (W x T x H):3000 W
500 x 150 x 450 mm
540 x 160 x 410 mmPower supply:220-240 V, 50-60 Hz
The water stills Puridest produce high-purity, low-gas, germ-free and pyrogen-free distillate, e.g. for diluting reagents and samples. After a direct connection to the raw water and the power supply, ultrapure water can be drawn off directly. The distillation systems with one or two distillation stages achieve excellent conductivity values. The glass water stills deliver water that is almost free of metal ions.With »GFL Technology« for the highest quality, reliability and durabilityDistillates with conductance values up to 1.6 µS/cm, comply with the DAB regulations and the provisions of international pharmacopoeias (conductance values are "approximate" values, depending on the raw water)R series has a built-in storage tankMaintenance needs are limited to simply cleaning contaminants from the stillWith LED indicators for operating status and cleaning requirements (PD 2 and PD 4 only with LED indicators for operating status)
Made from borosilicate glass. For fully automated, unattended operation, equipped with over-temperature thermostat, flow meter and reservoir level control. The water still works with every water supply. With silica sheathed heaters for the production of 8 l pyrogen-free distillate of high purity from any raw water supply. Rapid descaling with no need to dismantle the device thanks to the integrated funnel for addition of acid and the PTFE stopcock for draining the cleaning solution. The acrylic safety screen and the cabinet lid are removable for unrivalled access to the glassware components. The water connections are equipped with screwthreads for easy and safe fitting and removing of hoses without risk of damage. All components are enclosed in a cabinet which can either stand on the laboratory bench or can be wall mounted.Automatic switch-off on full reservoirCan be operated from 20 kPa water pressureEasy to cleanWall mounting includedSpecificationspH value:5.0…6.5Conductivity:1.0…2.0 µS/cmResistance:0.5…1.0 mΩ/cmWater consumption:
Output:approx. 120 l/h
8 l/hPower consumption:
Dimensions (W x T x H):6000 W
550 x 240 x 410 mmPower supply:220…240 V, 50-60 Hz